现行

ISO 10074-2021

Anodizing of aluminium and its alloys — Specification for hard anodic oxidation coatings on aluminium and its alloys
铝及其合金的阳极氧化 - 铝及其合金上硬阳极氧化涂层的规范

2021-05-25

现行

BS ISO 10074-2021

Anodizing of aluminium and its alloys. Specification for hard anodic oxidation coatings on aluminium and its alloys
铝及其合金的阳极氧化 铝及其合金硬质阳极氧化涂层规范

2021-06-07

现行

KS D ISO 2128(2016 Confirm)

알루미늄 및 알루미늄 합금의 양극산화 피막 처리－양극산화피막의 두께 측정－스플릿 빔 현미경을 이용한 비파괴 측정
铝及铝合金阳极氧化阳极氧化膜厚度的测定分光显微镜无损检测

2011-11-02

现行

ISO 2128-2010

Anodizing of aluminium and its alloys — Determination of thickness of anodic oxidation coatings — Non-destructive measurement by split-beam microscope
铝及其合金的阳极氧化——阳极氧化膜厚度的测定——分束显微镜无损检测

2010-08-20

现行

BS EN ISO 2128-2010

Anodizing of aluminium and its alloys. Determination of thickness of anodic oxidation coatings. Non-destructive measurement by split-beam microscope
铝及其合金的阳极氧化 阳极氧化膜厚度的测定 分束显微镜无损检测

2010-09-30

现行

JIS H 8687-2013

Anodizing of aluminium and its alloys -- Determination of electric strength
铝及铝合金阳极氧化电强度的测定

2013-01-01

现行

UNE 38019-1991

ANODIZING OF ALUMINIUM AND ITS ALLOYS. VOCABULARY.
铝及其合金的阳极氧化 词汇

1991-09-12

现行

GB/T 8014.2-2005

铝及铝合金阳极氧化 氧化膜厚度的测量方法 第2部分:质量损失法
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part2:Mass-loss method

2005-07-04

现行

GB/T 8014.1-2005

铝及铝合金阳极氧化 氧化膜厚度的测量方法 第1部分:测量原则
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 1:The measuring principle

2005-07-04

现行

JIS H 8680-3-2013

Anodizing of aluminium and its alloys -- Determination of thickness of anodic oxidation coatings -- Part 3: Non-destructive measurement by split-beam microscope
铝及铝合金阳极氧化阳极氧化膜厚度的测定第3部分:分光显微镜无损测量

2013-01-01

现行

KS D ISO 8125(2017 Confirm)

알루미늄과 알루미늄 합금의 양극산화－착색 양극산화 피막의 색과 색 차이 측정
铝及铝合金阳极氧化有色阳极氧化膜颜色和色差的测定

2007-10-30

现行

KS D ISO 8125(2022 Confirm)

알루미늄과 알루미늄 합금의 양극산화－착색 양극산화 피막의 색과 색 차이 측정
铝及其合金阳极氧化着色阳极涂层颜色和色差的测定

2007-10-30

现行

ISO 7583-2013

Anodizing of aluminium and its alloys — Terms and definitions
铝及其合金的阳极氧化——术语和定义

2013-07-29

现行

BS ISO 7583-2013

Anodizing of aluminium and its alloys. Terms and definitions
铝及其合金的阳极氧化 术语和定义

2013-08-31

现行

DIN EN ISO 2128

Anodizing of aluminium and its alloys - Determination of thickness of anodic oxidation coatings - Non-destructive measurement by split-beam microscope (ISO 2128:2010)
铝及其合金的阳极氧化.阳极氧化涂层厚度的测定.分束显微镜无损测量（ISO 2128-2010）

2010-12-01

现行

BS EN ISO 2376-2019

Anodizing of aluminium and its alloys. Determination of breakdown voltage and withstand voltage
铝及其合金的阳极氧化 击穿电压和耐受电压的测定

2019-04-24

现行

ISO 2376-2019

Anodizing of aluminium and its alloys — Determination of breakdown voltage and withstand voltage
铝及其合金阳极氧化击穿电压和耐受电压的测定

2019-03-06

现行

GB/T 8014.3-2005

铝及铝合金阳极氧化 氧化膜厚度的测量方法 第3部分:分光束显微镜法
Anodizing of aluminium and its alloys-The measuring method of thickness of anodic oxide coatings Part 3:Split-beam microscope method

2005-07-04

现行

JIS H 8603-1999

Hard anodic oxide coatings on aluminium and its alloys
铝及其合金上的硬质阳极氧化膜

1999-01-01

现行

ISO 7599-2018

Anodizing of aluminium and its alloys — Method for specifying decorative and protective anodic oxidation coatings on aluminium
铝及其合金的阳极氧化.铝上装饰性和保护性阳极氧化涂层的规定方法

2018-01-10