MIL MIL-DTL-55302/73D-印刷电路组件和附件连接器插针直角耐环境插头电气印刷电路板用极化（.150间距）（参见基础灭活通知）（取代MIL-C-55302/73C）-国家数字标准馆

现行 MIL MIL-DTL-55302/73D

到馆提醒

收藏跟踪

购买正版

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES, PIN, RIGHT ANGLE, ENVIRONMENTAL RESISTANT, PLUG, ELECTRICAL, POLARIZED FOR PRINTED WIRING BOARDS (.150 SPACING) (SEE BASE FOR INACTIVATION NOTICE) (SUPERSEDING MIL-C-55302/73C) 印刷电路组件和附件连接器插针直角耐环境插头电气印刷电路板用极化（.150间距）（参见基础灭活通知）（取代MIL-C-55302/73C）

发布日期： 2004-11-12

MIL-DTL-55302/73D已批准在空军部内使用，并可供国防部所有部门和机构使用。获取本文所述连接器的要求应包括本规范和最新版本的MIL-C-55302。

MIL-DTL-55302/73D is approved for use within the Department of the Air Force and is available for use by all Departments and Agendcies of the Department of Defense. The requirements for acquiring the connector described herein shall consist of this specification and the latest issue of MIL-C-55302.

分类信息

发布单位或类别：美国-美国军事规范和标准

关联关系

研制信息

相似标准/计划/法规

MIL MIL-DTL-55302/16C Amendment 1

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: PIN, RIGHT-ANGLE, FOR PRINTED WIRING BOARDS (.200 SPACING)
连接器印刷电路组件和附件:针直角用于印刷线路板（.200间距）

MIL MIL-DTL-55302/1E Amendment 1(amendment incorporated)

Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Right-Angle, for Printed Wiring Boards (.150 Spacing)
连接器印刷电路组件和附件:插头针式触点直角用于印刷线路板（.150间距）

MIL MIL-DTL-55302/1E Notice 1-Validation 1

Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Right-Angle, for Printed Wiring Boards (.150 Spacing)
连接器印刷电路组件和附件:插头针式触点直角用于印刷线路板（.150间距）

MIL MIL-DTL-55302/1E

Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Right-Angle, for Printed Wiring Boards (.150 Spacing)
连接器印刷电路组件和附件:插头插针触点直角用于印刷线路板（.150间距）

MIL MIL-DTL-55302G Amendment 2(all prev amd incorp.)

Connectors, Printed Circuit Subassembly and Accessories
连接器、印刷电路组件和附件

MIL MIL-DTL-55302G Amendment 1(amendment incorporated)

Connectors, Printed Circuit Subassembly and Accessories
连接器、印刷电路组件和附件

MIL MIL-DTL-55302G Supplement 1

Connectors, Printed Circuit Subassembly and Accessories
连接器、印刷电路组件和附件

MIL MIL-DTL-55302G Amendment 3

Connectors, Printed Circuit Subassembly and Accessories
连接器、印刷电路组件和附件

MIL MIL-DTL-55302G Amendment 4

Connectors, Printed Circuit Subassembly and Accessories
连接器、印刷电路组件和附件

MIL MIL-DTL-55302G

Connectors, Printed Circuit Subassembly and Accessories
连接器、印刷电路组件和附件

MIL MIL-DTL-55302/4F Amendment 1(amendment incorporated)

Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Right-Angle, for Multilayered Printed Wiring Boards (.100 Spacing)
连接器印刷电路子组件和附件:插头插针触点直角用于多层印刷线路板（.100间距）

MIL MIL-DTL-55302/7E Amendment 1(amendment incorporated)

Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Right-Angle, for Multilayered Printed Wiring Boards (.100 Spacing)
连接器印刷电路组件和附件:插头针接触直角用于多层印刷线路板（.100间距）

MIL MIL-DTL-55302/7E Notice 1-Validation 1

Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Right-Angle, for Multilayered Printed Wiring Boards (.100 Spacing)
连接器印刷电路组件和附件:插头针接触直角用于多层印刷线路板（.100间距）

MIL MIL-DTL-55302/4F Notice 1-Validation 1

Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Right-Angle, for Multilayered Printed Wiring Boards (.100 Spacing)
连接器印刷电路组件和附件:插头针接触直角用于多层印刷线路板（.100间距）

MIL MIL-DTL-55302/4F

Connectors, Printed Circuit Subassembly and Accessories: Plug, Pin Contacts, Right-Angle, for Multilayered Printed Wiring Boards (.100 Spacing)
连接器印刷电路组件和附件:插头针接触直角用于多层印刷线路板（.100间距）

MIL MIL-DTL-55302/124A Notice 1-Validation

Connectors, Printed Circuit Subassembly and Accessories: Keying Accessories
连接器印刷电路组件和附件:键控附件

MIL MIL-DTL-55302/31L Notice 1-Validation 1

Connectors, Printed Circuit Subassembly and Accessories: Keying Accessories
连接器印刷电路组件和附件:键控附件

MIL MIL-DTL-55302/31L Notice 2-Validation 2

Connectors, Printed Circuit Subassembly and Accessories: Keying Accessories
连接器印刷电路组件和附件:键控附件

MIL MIL-DTL-55302/124A Notice 2-Validation 2

CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: KEYING ACCESSORIES
连接器印刷电路部件和附件:键控附件

MIL MIL-DTL-55302/31L

Connectors, Printed Circuit Subassembly and Accessories: Keying Accessories
连接器、印刷电路组件和附件:键控附件

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统