MIL MIL-DTL-32460B-压力为1500至3000 PSI和-65至250华氏度的37度扩口管接头至ORFS连接器的液压和气动适配器通用规范-国家数字标准馆

现行 MIL MIL-DTL-32460B

到馆提醒

收藏跟踪

购买正版

ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR 压力为1500至3000 PSI和-65至250华氏度的37度扩口管接头至ORFS连接器的液压和气动适配器通用规范

发布日期： 2020-03-10

MIL-DTL-32460B涵盖用于液压或气动系统的接头、适配器、液压、气动和输送装置、37°扩口至O形圈端面密封（ORFS）接头、1500至3000 psi、-65°F至250°F温度范围。37°扩口连接器端部符合SAE AS4395连接器端部的要求，ORFS端部符合SAE J1453-3连接器端部的要求。

MIL-DTL-32460B covers fittings, adapter, hydraulic, pneumatic, and conveyance, 37° flared to O-ring face seal (ORFS) connectors, 1500 to 3000 psi, -65°F to 250°F temperature range, for use in hydraulic or pneumatic systems. The 37° flared connector ends are in accordance with SAE AS4395 connector ends, the ORFS end is in accordance with SAE J1453-3 connector ends.

分类信息

发布单位或类别：美国-美国军事规范和标准

关联关系

研制信息

相似标准/计划/法规

MIL MIL-DTL-32460/1 Notice 1-Validation 1

Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Male
接头转换接头直通液压和气动 37度扩口外螺纹至ORFS外螺纹

MIL MIL-DTL-32460/4 Notice 1-Validation 1

Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Bulkhead
直通接头、转换接头、液压和气动接头、37度扩口、外螺纹至ORFS隔板

MIL MIL-DTL-32460/4A

Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Bulkhead
37度喇叭形直通液压和气动接头外螺纹至ORFS隔板

MIL MIL-DTL-32460/1A

Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Male
外螺纹至ORFS外螺纹37度喇叭口直形液压和气动接头

MIL MIL-DTL-32460/5A

Fitting, Adapter, 45 Degrees, Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Bulkhead
接头适配器 45度弯头液压和气动 37度喇叭形外螺纹至ORFS隔板

MIL MIL-DTL-32460/3A

Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Male
接头适配器 90度弯头液压和气动 37度扩口外螺纹至ORFS外螺纹

MIL MIL-DTL-32460/3 Notice 1-Validation 1

Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Male
配件适配器 90度弯头液压和气动 37度Flare 男性Orfs男性

MIL MIL-DTL-32460/5 Notice 1-Validation 1

Fitting, Adapter, 45 Degrees, Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Bulkhead
接头、转换接头、45度弯头、液压和气动、37度扩口、外螺纹至ORFS隔板

MIL MIL-DTL-32460/6 Notice 1-Validation 1

Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Bulkhead
接头、转换接头、90度弯头、液压和气动、37度扩口、外螺纹至ORFS隔板

MIL MIL-DTL-32460/2 Notice 1-Validation 1

Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Male
接头转换接头 45度弯头液压和气动 37度扩口外螺纹至ORFS外螺纹

MIL MIL-DTL-32460/6A

Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Bulkhead
接头适配器 90度弯头液压和气动 37度扩口外螺纹至ORFS隔板

MIL MIL-DTL-32460/2A

Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS Male
接头适配器 45度弯头液压和气动 37度扩口外螺纹至ORFS外螺纹

MIL MIL-DTL-32460/7 Notice 1-Validation 1

Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS, Female Swivel
接头、转换接头、直通、液压和气动、37度扩口、外螺纹至ORFS、内螺纹旋转接头

MIL MIL-DTL-32460/7A

Fitting, Adapter, Straight, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS, Female Swivel
37度喇叭形直形液压和气动接头外螺纹至ORFS 内螺纹旋转接头

MIL MIL-DTL-32460/9 Notice 1-Validation 1

Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS, Female Swivel
接头、转换接头、90度弯头、液压和气动、37度扩口、外螺纹至ORFS、内螺纹旋转接头

MIL MIL-DTL-32460/8 Notice 1-Validation 1

Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS, Female Swivel
接头、转换接头、45度弯头、液压和气动、37度扩口、外螺纹至ORFS、内螺纹旋转接头

MIL MIL-DTL-32460/8A

Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS, Female Swivel
接头适配器 45度弯头液压和气动 37度喇叭形外螺纹至ORFS 内螺纹旋转接头

MIL MIL-DTL-32460/9A

Fitting, Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic, 37 Degrees Flare, Male to ORFS, Female Swivel
接头适配器 90度弯头液压和气动 37度喇叭形外螺纹至ORFS 内螺纹旋转接头

MIL MIL-DTL-32460B Supplement 1

ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR
1500至3000磅/平方英寸和-65华氏度至250华氏度的用于ORFS连接器的37度火炬管接头的液压和气动适配器的通用规范

MIL MS51525C Amendment 1

FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED
37度扩口无扩口钢制液压管接头；37度扩口管到凸台O形圈直通接头

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统