BS 05/30140290 DC-IEC 60512-16-14 电子设备用连接器测试和测量第16-14部分触点和终端的机械试验测试16n 弯曲强度固定凸耳-国家数字标准馆

现行 BS 05/30140290 DC

到馆提醒

收藏跟踪

购买正版

IEC 60512-16-14. Connectors for electronic equipment. Tests and measurements. Part 16-14. Mechanical tests on contacts and terminations. Test 16n. Bending strength fixed male tabs IEC 60512-16-14 电子设备用连接器测试和测量第16-14部分触点和终端的机械试验测试16n 弯曲强度固定凸耳

发布日期： 2005-10-11

购买本文件时可获得的所有当前修订均包含在购买本文件中。

All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

DIN EN 60512-16-14

Connectors for electronic equipment - Tests and measurements - Part 16-14: Mechanical tests on contacts and terminations - Test 16n: Bending strength, fixed male tabs (IEC 60512-16-14:2008); German version EN 60512-16-14:2008
电子设备连接器.试验和测量.第16-14部分:触点和终端的机械试验.试验16n:固定凸耳的弯曲强度（IEC 60512-16-14-2008）；德语版本EN 60512-16-14:2008

UNE-EN 60512-14-4-2007

Connectors for electronic equipment - Tests and measurements -- Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006).
电子设备用连接器.试验和测量.第14-4部分:密封试验.试验14d:浸入式防水（IEC 60512-14-4-2006）

UNE-EN 60512-14-6-2007

Connectors for electronic equipment - Tests and measurements -- Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006).
电子设备用连接器.试验和测量.第14-6部分:密封试验.试验14f:界面密封（IEC 60512-14-6-2006）

DIN EN 60512-14-4

Connectors for electronic equipment - Tests and measurements - Part 14-4: Sealing tests - Test 14d: Immersion - Waterproof (IEC 60512-14-4:2006); German version EN 60512-14-4:2006
电子设备用连接器.试验和测量.第14-4部分:密封试验.试验14d:浸入式防水（IEC 60512-14-4-2006）；德文版EN 60512-14-4:2006

DIN EN 60512-14-6

Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006); German version EN 60512-14-6:2006
电子设备用连接器.试验和测量.第14-6部分:密封试验.试验14f:界面密封（IEC 60512-14-6-2006）；德文版EN 60512-14-6:2006

BS 05/30140239 DC

IEC 60512-16-1. Connectors for electronic equipment. Tests and measurements. Part 16-1. Mechanical tests on contacts and terminations. Test 16a. Probe damage
IEC 60512-16-1 电子设备用连接器测试和测量第16-1部分触点和终端的机械试验测试16a 探针损伤

BS 05/30140246 DC

IEC 60512-16-2. Connectors for electronic equipment. Tests and measurements. Part 16-2. Mechanical tests on contacts and terminations. Test 16b. Restricted entry
IEC 60512-16-2 电子设备用连接器测试和测量第16-2部分触点和终端的机械试验测试16b 限制进入

BS 05/30140262 DC

IEC 60512-16-6. Connectors for electronic equipment. Tests and measurements. Part 16-6. Mechanical tests on contacts and terminations. Test 16f. Robustness of terminations
IEC 60512-16-6 电子设备用连接器测试和测量第16-6部分触点和终端的机械试验测试16f 引出端强度试验

BS 05/30140295 DC

IEC 60512-16-16. Connectors for electronic equipment. Tests and measurements. Part 16-16. Mechanical tests on contacts and terminations. Test 16p. Torsional strength, fixed male tabs
IEC 60512-16-16 电子设备用连接器测试和测量第16-16部分触点和终端的机械试验测试16p 扭转强度固定凸耳

DIN EN 60512-16-16

Connectors for electronic equipment - Tests and measurements - Part 16-16: Mechanical tests on contacts and terminations - Test 16p: Torsional strength, fixed male tabs (IEC 60512-16-16:2008); German version EN 60512-16-16:2008
电子设备连接器.试验和测量.第16-16部分:触点和终端的机械试验.试验16p:固定凸耳扭转强度（IEC 60512-16-16-2008）；德语版本EN 60512-16-16:2008

DIN EN 60512-14-5

Connectors for electronic equipment - Tests and measurements - Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006); German version EN 60512-14-5:2006
电子设备连接器.试验和测量.第14-5部分:密封试验.试验14e:低气压下的浸入（IEC 60512-14-5-2006）；德文版EN 60512-14-5:2006

DIN EN 60512-14-2

Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006); German version EN 60512-14-2:2006
电子设备用连接器.试验和测量.第14-2部分:密封试验.试验14b:密封.细空气泄漏（IEC 60512-14-2-2006）；德文版EN 60512-14-2:2006

UNE-EN 60512-14-5-2007

Connectors for electronic equipment - Tests and measurements -- Part 14-5: Sealing tests - Test 14e: Immersion at low air pressure (IEC 60512-14-5:2006).
电子设备用连接器.试验和测量.第14-5部分:密封试验.试验14e:低气压下的浸入（IEC 60512-14-5-2006）

UNE-EN 60512-14-2-2007

Connectors for electronic equipment - Tests and measurements -- Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006).
电子设备用连接器.试验和测量.第14-2部分:密封试验.试验14b:密封.细空气泄漏（IEC 60512-14-2-2006）

DIN EN 60512-11-14

Connectors for electronic equipment - Tests and measurements - Part 11-14: Climatic tests - Test 11p: Flowing single gas corrosion test (IEC 60512-11-14:2003); German version EN 60512-11-14:2003
电子设备连接器.试验和测量.第11-14部分:气候试验.试验11p:流动单气体腐蚀试验（IEC 60512-11-14-2003）；德文版EN 60512-11-14:2003

BS 05/30140250 DC

IEC 60512-16-3. Connectors for electronic equipment. Tests and measurements. Part 16-3. Mechanical tests on contacts and terminations. Test 16c. Contact bending strength
IEC 60512-16-3 电子设备用连接器测试和测量第16-3部分触点和终端的机械试验测试16c 接触弯曲强度

DIN EN 60512-16-6

Connectors for electronic equipment - Tests and measurements - Part 16-6: Mechanical tests on contacts and terminations - Test 16f: Robustness of terminations (IEC 60512-16-6:2008); German version EN 60512-16-6:2008
电子设备连接器.试验和测量.第16-6部分:触点和终端的机械试验.试验16f:终端的坚固性（IEC 60512-16-6-2008）；德文版EN 60512-16-6:2008

DIN EN 60512-16-2

Connectors for electronic equipment - Tests and measurements - Part 16-2: Mechanical tests on contacts and terminations - Test 16b: Restricted entry (IEC 60512-16-2:2008); German version EN 60512-16-2:2008
电子设备连接器.试验和测量.第16-2部分:触点和终端的机械试验.试验16b:限制进入（IEC 60512-16-2-2008）；德语版本EN 60512-16-2:2008

DIN EN 60512-16-1

Connectors for electronic equipment - Tests and measurements - Part 16-1: Mechanical tests on contacts and terminations - Test 16a: Probe damage (IEC 60512-16-1:2008); German version EN 60512-16-1:2008
电子设备连接器.试验和测量.第16-1部分:触点和终端的机械试验.试验16a:探针损坏（IEC 60512-16-1-2008）；德语版本EN 60512-16-1:2008

BS 05/30140266 DC

IEC 60512-16-7. Connectors for electronic equipment. Tests and measurements. Part 16-7. Mechanical tests on contacts and terminations. Test 16g. Measurement of contact deformation after crimping
IEC 60512-16-7 电子设备用连接器测试和测量第16-7部分触点和终端的机械试验测试16g 压接后接触变形的测量

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统