IEC TS 61496-5:20 23对非接触式电敏防护设备(ESPE)的设计、构造和测试提供了特殊要求，该设备专门设计用于作为安全相关系统的一部分对一个人或多个人进行全身检测，采用雷达保护装置(RPD)，响应雷达信号的漫反射，使用调频连续波(FMCW)技术实现传感功能。特别注意确保实现适当的安全相关性能的特征。ESPE可以包括可选的安全相关功能，其要求在IEC 61496-1:20 20的附录A和本文件的附录A中给出。 本文件中给出的要求与工业制造环境中存在的成年人的检测有关。本文件没有规定检测区的尺寸或配置及其与任何特定应用的危险部件的关系，也没有规定任何机器的危险状态。它仅限于ESPE的功能及其与机器的接口方式。 本文档不考虑移动RPD应用程序的各个方面。如果RPD供应商指定RPD用于移动应用，则可能需要额外考虑。 如果RPD的设置与图2和图4不同，则可以应用其他要求和测试。 如果本文件不包含所有必要的规定，则使用IEC TS 62998-1。 对于本文件中未考虑的那些方面，也可以另外使用IEC TS 62998-1. 本文件不包括使用9GHz至81GHz范围之外的电磁辐射的RPD（根据ITU无线电法规被识别为频带10和频带11的子集）。对于采用超出该范围的电磁辐射的传感设备，本文件可用作指南。国家法规可以限制可用频率。 本文件可以与保护人员以外的应用相关，例如保护机器或产品免受机械损坏。在那些应用中，不同的要求可能是合适的，例如当要由感测功能识别的材料具有与人的特性不同的特性时。 本文件不涉及与人员保护无关的ESPE职能的要求（例如。g.使用感测单元数据进行导航)。 虽然数据接口可用于控制可选的安全相关ESPE功能（附录A），但本文件未提供具体要求。这些安全相关功能的要求可以通过参考其他标准（例如，IEC 61508、IEC 62046、IEC 62061和ISO 13849-1）来确定。 本文档不涉及EMC排放要求。

IEC TS 61496-5:2023 provides particular requirements for the design, construction and testing of non-contact electro-sensitive protective equipment (ESPE) designed specifically to provide whole-body detection of a person or persons as part of a safety-related system, employing radar protective devices (RPDs) responsive to diffuse reflection of radar signals for the sensing function using frequency-modulated continuous-wave (FMCW) technique. Special attention is directed to features which ensure that an appropriate safety-related performance is achieved. An ESPE can include optional safety-related functions, the requirements for which are given in Annex A of IEC 61496-1:2020 and Annex A of this document.
The requirements given in this document are related to the detection of adult persons being present in an industrial manufacturing environment.
This document does not specify the dimensions or configurations of the detection zone and its disposition in relation to hazardous parts for any particular application, nor what constitutes a hazardous state of any machine. It is restricted to the functioning of the ESPE and how it interfaces with the machine.
This document does not consider the aspects of a moving RPD application. Additional consideration can be necessary, if the RPD supplier specifies the RPD for use on moving application.
Additional requirements and tests can apply if setup of the RPD differs from Figure 2 and Figure 4.
Where this document does not contain all necessary provisions, IEC TS 62998-1 is used.
For those aspects not considered in this document it is also possible to additionally use provisions from IEC TS 62998-1.
Excluded from this document are RPDs that employ electromagnetic radiation outside the range 9 GHz to 81 GHz (identified as subset of band 10 and band 11 in accordance with ITU Radio Regulations). For sensing devices that employ electromagnetic radiation outside this range, this document can be used as a guide. National regulations can limit the available frequencies.
This document can be relevant to applications other than those for the protection of persons, for example for the protection of machinery or products from mechanical damage. In those applications, different requirements can be appropriate, for example when the materials to be recognized by the sensing function have different properties from those of persons.
This document does not deal with requirements for ESPE functions not related to the protection of persons (e.g. using sensing unit data for navigation).
While a data interface can be used to control optional safety-related ESPE functions (Annex A), this document does not provide specific requirements. Requirements for these safety-related functions can be determined by consulting other standards (for example, IEC 61508, IEC 62046, IEC 62061, and ISO 13849-1).
This document does not deal with EMC emission requirements.