BS ISO 18522:2016规定了确定物理材料横向轮廓的程序 使用自动离线测试仪测试纸张和纸板的性能。对于给定的 测量时，参考相关国际标准。它适用于大多数纸张 和纸板，但与纸巾和瓦楞纸板无关。在本文件中，由纸和纸板生产商和客户商定 属性是相关的。结果以平均值或整个机器的轮廓报告。 一些属性以索引形式报告。使用基于独立设备的相关ISO标准获得的结果用于以下情况: 如未另行约定，则提出质疑或争议。注1:使用根据ISO 187和独立试验调节的试样获得的结果 对于某些纸张性质，仪器将不同于使用未经处理的试样和试样获得的仪器 自动离线测试仪。调查仅在有限的范围内进行，其中自动离线 测试与独立仪器进行了比较，包括调节的影响。总结一下 调查报告见附录B。注2:也可以评估机器方向（MD）的性能，但这通常仅用于 用于解决问题。交叉引用:ISO 186:2002ISO 187ISO 534ISO 536ISO 1924-2ISO 1924-3ISO 1974ISO 2469:2014ISO 2470-1ISO 2470-2ISO 2471ISO 2493-1ISO 2758ISO 2759ISO 5627ISO 5631-1ISO 5631-2ISO 5631-3ISO 5636-6ISO 8254-1ISO 8254-2ISO 8254-3ISO 8791-4ISO 9416ISO 9895ISO 11475ISO 11476ISO/TR 24498SCAN-P 26:78I T 1200 sp-07所有当前修订版均随购买时提供购买本文件。

BS ISO 18522:2016 specifies the procedures for determining the cross direction profiles of physical properties of paper and board using automated off-line testers. Where available for a given measurement, the relevant International Standard is referred to. It is applicable to most kinds of paper and board, but is not relevant for tissue and corrugated board.In this document, it is left to the paper and board producer and the customer to agree upon which properties are relevant. The results are reported as mean values or as profiles across the machine. Some properties are reported in index form.The result obtained using the relevant ISO standard based on stand-alone equipment is used in case of challenge or dispute, if not otherwise agreed.NOTE 1 The results obtained using specimens conditioned according to ISO 187 and stand-alone test instruments will, for some paper properties, differ from those obtained with unconditioned specimens and automated off-line testers. An investigation was made to only a limited extent, where the automated off-line testing was compared to stand-alone instruments, including the impact of conditioning. A summary of this investigation is reported in Annex B.NOTE 2 It is also possible to evaluate properties in the machine direction (MD), but this is usually only used for trouble-shooting.Cross References:ISO 186:2002ISO 187ISO 534ISO 536ISO 1924-2ISO 1924-3ISO 1974ISO 2469:2014ISO 2470-1ISO 2470-2ISO 2471ISO 2493-1ISO 2758ISO 2759ISO 5627ISO 5631-1ISO 5631-2ISO 5631-3ISO 5636-3ISO 5636-6ISO 8254-1ISO 8254-2ISO 8254-3ISO 8791-2ISO 8791-4ISO 9416ISO 9895ISO 11475ISO 11476ISO/TR 24498SCAN-P 26:78TAPPI T 1200 sp-07All current amendments available at time of purchase are included with the purchase of this document.