BS EN ISO 21009-2:2015规定了设计的静态真空绝缘容器的操作要求 最大允许压力超过50 kPa（0.5 bar）。它也可以用作 设计用于最大允许压力小于50 kPa（0.5 bar）的容器。ISO 21009的本部分适用于为ISO 21009-1中规定的低温流体设计的容器。 静态低温容器通常部分由制造商配备，但可以安装或重新安装 由另一方，如运营商、用户或所有者。注1:对于这些容器的安装，可适用附加要求；这些定义见 具体规定。注2:本标准的一些要求可由当地法规涵盖，例如:。 g、 安全距离， 职业安全与健康。如果本国际标准的要求与任何适用的当地法规之间存在冲突，则始终以当地法规为准。交叉引用:ISO 23208ISO 21009-1CGA G-6.7CGA SB-45IGC文件。115/12/EIGC文件。164/10/E2014/68/EU购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN ISO 21009-2:2015 specifies operational requirements for static vacuum insulated vessels designed for a maximum allowable pressure of more than 50 kPa (0,5 bar). It may also be used as a guideline for vessels designed for a maximum allowable pressure of less than 50 kPa (0,5 bar).This part of ISO 21009 applies to vessels designed for cryogenic fluids specified in ISO 21009-1. Static cryogenic vessels are often partly equipped by the manufacturer, but may be installed or reinstalled by another party, such as the operator, user or owner.NOTE 1 For the installation of these vessels, additional requirements can apply; these are defined in specific regulations.NOTE 2 Some requirements of this standard can be covered by local regulations, e.g. safety distances, occupational safety and health. Where there is a conflict between the requirements of this International Standard and any applicable local regulation, the local regulation always takes precedence.Cross References:ISO 23208ISO 21009-1CGA G-6.7CGA SB-45IGC doc. 115/12/EIGC doc. 164/10/E2014/68/EUAll current amendments available at time of purchase are included with the purchase of this document.