现行

BS EN 13421-2006

Plastics. Thermoset moulding compounds. Composites and reinforcement fibres. Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
塑料 热固性模塑化合物 复合材料和增强纤维 测定模压复合材料性能各向异性的试样制备

2006-03-20

现行

DIN EN 13421

Plastics - Thermoset moulding compounds - Composites and reinforcement fibres - Preparation of specimens for determining the anisotropy of the properties of compression moulding composites
塑料.热固性模塑化合物.复合材料和增强纤维.测定压缩模塑复合材料性能各向异性的试样制备；德文版EN 13421:2005

2006-05-01

现行

BS EN ISO 12114-1997

Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of cure characteristics
纤维增强塑料 热固性模塑化合物和预浸料 固化特性的测定

1997-08-15

现行

KS M ISO 12114(2020 Confirm)

섬유 강화 플라스틱－열경화성 성형 콤파운드 및 프리프레그－경화 특성의 측정
纤维增强塑料热固性模塑化合物和预浸料固化特性的测定

2002-05-31

现行

GB/T 36532-2018

纤维增强塑料 热固性模塑料和预浸料 固化特性测定
Fibre-reinforced plastics—Thermosetting moulding compounds and prepregs—Determination of cure characteristics

2018-07-13

现行

ISO 12114-1997

Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of cure characteristics
纤维增强塑料——热固性模塑化合物和预浸料——固化特性的测定

1997-05-15

现行

BS EN 14598-1-2005

Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC)-Designation
增强热固性模塑化合物 片状模塑料（SMC）和块状模塑料（BMC）规范 任命

2005-06-24

现行

BS EN 14598-3-2005

Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC)-Specific requirements
增强热固性模塑化合物 片状模塑料（SMC）和块状模塑料（BMC）规范

2005-05-25

现行

BS EN ISO 12115-1997

Fibre-reinforced plastics. Thermosetting moulding compounds and prepregs. Determination of flowability, maturation and shelf life
纤维增强塑料 热固性模塑化合物和预浸料 流动性、成熟度和保质期的测定

1997-08-15

现行

KS M ISO 12115(2017 Confirm)

섬유강화 플라스틱-열경화성 성형 컴파운드 및 프리프레그-유동성,숙성 및 가사 시간의 측정
纤维增强塑料热固性模塑化合物和预浸料流动性、成熟度和保质期的测定

2002-05-31

现行

KS M ISO 12115(2022 Confirm)

섬유강화 플라스틱-열경화성 성형 컴파운드 및 프리프레그-유동성,숙성 및 가사 시간의 측정
纤维增强塑料热固性模塑化合物和预浸料流动性、成熟度和保质期的测定

2002-05-31

现行

ISO 12115-1997

Fibre-reinforced plastics — Thermosetting moulding compounds and prepregs — Determination of flowability, maturation and shelf life
纤维增强塑料——热固性模塑化合物和预浸料——流动性、成熟度和保质期的测定

1997-05-15

现行

DIN EN 14598-1

Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
增强热固性模塑料.片状模塑料（SMC）和块状模塑料（BMC）规范.第1部分:名称；德文版EN 14598-1:2005

2005-07-01

现行

UNE-EN 14598-1-2006

Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 1: Designation
增强热固性模塑料.片状模塑料（SMC）和块状模塑料（BMC）规范.第1部分:名称

2006-01-25

现行

BS EN 14598-2-2005

Reinforced thermosetting moulding compounds. Specification for sheet moulding compound (SMC) and bulk moulding compound (BMC)-Methods of test and general requirements
增强热固性模塑化合物 片状模塑料（SMC）和块状模塑料（BMC）规范

2006-07-31

现行

DIN EN 14598-3

Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
增强热固性模塑料.片状模塑料（SMC）和块状模塑料（BMC）规范.第3部分:特殊要求；德文版EN 14598-3:2005

2005-07-01

现行

UNE-EN 14598-3-2006

Reinforced thermosetting moulding compounds - Specification for Sheet Moulding Compound (SMC) and Bulk Moulding Compound (BMC) - Part 3: Specific requirements
增强热固性模塑料.片状模塑料（SMC）和块状模塑料（BMC）规范.第3部分:特殊要求

2006-01-25

现行

BS EN 1842-1997

Plastics. Thermoset moulding compounds (SMC-BMC). Determination of compression moulding shrinkage
塑料 热固性模塑化合物（SMC-BMC） 模压收缩率的测定

1997-11-15

现行

UNE-EN 1842-1998

PLASTICS. THERMOSET MOULDING COMPOUNDS (SMC - BMC). DETERMINATION OF COMPRESSION MOULDING SHRINKAGE
塑料 热固性模塑化合物（SMC-BMC） 模压收缩率的测定

1998-08-11

现行

UNE-EN ISO 12114-1997

FIBRE-REINFORCED PLASTICS. THERMOSETTING MOULDING COMPOUNDS AND PREPREGS. DETERMINATION OF CURE CHARACTERISTICS. (ISO 12114:1997).
纤维增强塑料 热固性模塑化合物和预浸料 固化特性的测定 （ISO 12114:1997）

1997-12-31