本文件规定了检验带提升操作员位置的订单分拣卡车稳定性的试验，如ISO 5053-1所定义，操作员位置可提升至1200 mm以上的高度。 本标准适用于在正常工作条件下装有叉臂、平台和/或集成附件的工业卡车。 它不适用于装有可横向移动或从卡车纵向中心平面旋转的载重汽车。交叉引用:ISO 22915-1ISO 5053-1ISO 22915-9:2014ISO 22915-7:2016ISO 22915-11:2011ISO 22915-21:2019ISO 22915-16:2014ISO 22915-22:2014ISO 22915-1:2016ISO 22915-3:2014ISO 22915-5:2014ISO 22915-15:2013ISO 22915-10:2008ISO 22915-8:2018ISO 22915- 20:2008ISO 22915-4:2018ISO 22915-24:2015ISO 22915-13:2012/Cor 1:2013ISO 22915-14:2010ISO 22915-2:2018ISO 22915-12:2015购买本文件时可获得的所有现行修订均包含在购买本文件中。

This document specifies the tests for verifying the stability of order picking trucks with an elevating operator position, as defined in ISO 5053-1, where the operator's position can be raised to an elevation above 1 200 mm. It is applicable to industrial trucks fitted with fork arms, platforms and/or integrated attachments under normal operating conditions. It is not applicable to trucks fitted with a load carrier that can be shifted laterally or pivoted out of the truck's longitudinal centre plane.Cross References:ISO 22915-1ISO 5053-1ISO 22915-9:2014ISO 22915-7:2016ISO 22915-11:2011ISO 22915-21:2019ISO 22915-16:2014ISO 22915-22:2014ISO 22915-1:2016ISO 22915-3:2014ISO 22915-5:2014ISO 22915-15:2013ISO 22915-10:2008ISO 22915-8:2018ISO 22915-20:2008ISO 22915-4:2018ISO 22915-24:2015ISO 22915-13:2012/Cor 1:2013ISO 22915-14:2010ISO 22915-2:2018ISO 22915-12:2015All current amendments available at time of purchase are included with the purchase of this document.