首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ISO 16929:2021
到馆阅读
收藏跟踪
购买正版
Plastics — Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test 塑料 - 在中试规模测试中确定塑料材料在规定的堆肥条件下的崩解度
发布日期: 2021-03-11
本文件定义了一种试验方法,用于确定在规定条件下进行的中试规模好氧堆肥试验中塑料材料的分解程度。它是ISO 17088中概述的塑料工业可堆肥性评估总体方案的一部分。 本文件中规定的试验方法也用于确定试验材料对堆肥过程和获得的堆肥质量的影响。本试验方法不能用于确定试验材料的好氧生物降解性。 注:本试验可采用其他方法(例如,参见ISO 14851、ISO 14852或ISO 14855-1和ISO 14855-2)。
This document defines a test method used to determine the degree of disintegration of plastic materials in a pilot-scale aerobic composting test under defined conditions. It forms part of an overall scheme for the evaluation of the industrial compostability of plastics as outlined in ISO 17088. The test method laid down in this document is also used to determine the influence of the test material on the composting process and the quality of the compost obtained. This test method cannot be used to determine the aerobic biodegradability of a test material. NOTE Other methods are available for this test (for example, see ISO 14851, ISO 14852 or ISO 14855-1 and ISO 14855-2).
分类信息
关联关系
研制信息
归口单位: ISO/TC 61/SC 14
相似标准/计划/法规
现行
ISO 20200-2023
Plastics — Determination of the degree of disintegration of plastic materials under composting conditions in a laboratory-scale test
塑料.实验室规模试验中堆肥条件下塑料材料崩解程度的测定
2023-08-25
现行
ISO 22766-2020
Plastics — Determination of the degree of disintegration of plastic materials in marine habitats under real field conditions
塑料.在实际现场条件下海洋生境中塑料材料分解程度的测定
2020-03-09
现行
GB/T 43287-2023
塑料 在实际野外条件海洋环境中塑料材料崩解度的测定
Plastics—Determination of the degree of disintegration of plastic materials in marine habitats under real field conditions
2023-11-27
现行
KS T ISO 20200(2022 Confirm)
플라스틱-시험실 규모의 모사 퇴비화 조건에서 플라스틱 재료의 붕괴도 측정
塑料-实验室规模试验中模拟堆肥条件下塑料材料分解程度的测定
2012-11-21
现行
KS T ISO 20200(2017 Confirm)
플라스틱-시험실 규모의 모사 퇴비화 조건에서 플라스틱 재료의 붕괴도 측정
塑料-实验室规模试验中模拟堆肥条件下塑料材料崩解度的测定
2012-11-21
现行
KS M ISO 16929
플라스틱 — 파일럿-규모 시험에 의한 규정된 퇴비화 조건에서의 플라스틱 붕괴도 측정
塑料 - 在中试规模测试中确定塑料材料在规定的堆肥条件下的崩解度
2020-12-30
现行
BS EN ISO 16929-2021
Plastics. Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
塑料 在中试规模试验中确定塑料材料在规定堆肥条件下的分解程度
2021-04-12
现行
GB/T 41639-2022
塑料 在实验室规模模拟堆肥化条件下塑料材料崩解率的测定
Plastics—Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test
2022-07-11
现行
GB/T 19811-2005
在定义堆肥化中试条件下 塑料材料崩解程度的测定
Plastics-Determination of the degree of disintegration of plastic materials under defined composting conditions in a pilot-scale test
2005-03-23
现行
GOST R 57225-2016
Пластмассы. Определение степени разложения пластмасс в имитированных условиях компостирования при лабораторных испытаниях
塑料 在实验室规模试验中测定模拟堆肥条件下塑料材料的崩解度
现行
GOST R 57226-2016
Пластмассы. Определение степени разложения в установленных условиях компостирования в процессе пробных испытаний
塑料 在中试规模测试中确定在规定的堆肥条件下的崩解度
现行
UNE-EN ISO 20200-2006
Plastics - Determination of the degree of disintegration of plastic materials under simulated composting conditions in a laboratory-scale test (ISO 20200:2004)
塑料.实验室规模试验中模拟堆肥条件下塑料材料分解程度的测定(ISO 20200-2004)
2006-05-10
现行
ISO 23832-2021
Plastics — Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
塑料.在实验室条件下暴露于海洋环境基质中的塑料材料降解率和崩解度测定的试验方法
2021-06-15
现行
BS ISO 23832-2021
Plastics. Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
塑料 实验室条件下暴露于海洋环境基质中的塑料材料降解率和崩解度测定的试验方法
2021-06-16
现行
GB/T 43289-2023
塑料 实验室条件下测定暴露于海洋环境基质中塑料材料分解率和崩解程度的试验方法
Plastics—Test methods for determination of degradation rate and disintegration degree of plastic materials exposed to marine environmental matrices under laboratory conditions
2023-11-27
现行
UNE 53243-15-1974
PLASTICS. FABRICS COATED WITH PVC. DETERMINATION OF GELIFICATION DEGREE.
塑料 用PVC涂层的织物 凝胶化程度的测定
1974-08-15
现行
GB/T 12008.6-2010
塑料 聚醚多元醇 第6部分:不饱和度的测定
Plastics - Polyether polyols - Part 6: Determination of degree of unsaturation
2010-09-26
现行
ISO 17710-2023
Plastics — Polyols for use in the production of polyurethanes — Determination of degree of unsaturation by microtitration
塑料.聚氨酯生产用多元醇.用微量滴定法测定不饱和度
2023-06-20
现行
ISO 17771-2003
Plastics — Thermoset moulding compounds — Determination of the degree of fibre wetting in SMC
塑料制品;热固性模塑化合物——SMC中纤维润湿度的测定
2003-07-30
现行
ISO 14848-1998
Plastics — Unsaturated-polyester resins — Determination of reactivity at 130 degrees C
塑料制品;不饱和聚酯树脂——130℃下反应性的测定
1998-06-04