现行

BS 5L 34-1985

Specification for forging stock, bars, extruded sections and forgings of 99% aluminium
99%铝的锻坯、棒材、挤压型材和锻件规范

1985-12-31

现行

BS 2B 23-2009

Specification for copper-aluminium-nickel-iron alloy rods, bars, sections, forging stock and forgings
铜铝镍铁合金棒材、棒材、型材、锻坯和锻件规范

2009-11-30

现行

BS 3B 25-2009

Specification for copper-nickel-silicon alloy rods, bars, sections, forging stock and forgings (heat treated)
铜镍硅合金棒材、棒材、型材、锻坯和锻件（热处理）规范

2009-11-30

现行

DOD DOD-F-24669

FORGINGS AND FORGING STOCK, STEEL BARS, BILLETS AND BLOOMS, GENERAL SPECIFICATION FOR (METRIC)
锻件和锻坯、钢筋、钢坯和初轧坯通用规范（米制）

1986-07-07

现行

BS 2L 85-1971

Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
铝-铜-硅-镁合金（固溶处理和沉淀处理）的锻坯、棒材、挤压型材和锻件规范（Cu 1.5、Si 1、Mg 0.8）

1971-08-31

现行

GB/T 33201-2016

NCu30-3-0.5合金棒材、线材、锻件和锻坯 通用技术条件
NCu30-3-0.5 alloy bar,wire,forgings and forging stock—General specification

2016-12-13

现行

BS EN 2954-002-2010

Aerospace series. Macrostructure of titanium and titanium alloy wrought products-Macrostructure of bar, section, forging stock and forgings
航空航天系列 钛及钛合金锻造制品的宏观组织 棒材、型材、锻坯和锻件的宏观组织

2010-03-31

现行

BS S 163-1990

Specification for nickel-chromium-molybdenum-vanadium steel forging stock, forgings, bars and parts (1900 MPa : limiting ruling section 100 mm)
镍-铬-钼-钒钢锻坯、锻件、棒材和零件规范（1900 MPa:极限截面100 mm）

1990-10-31

现行

BS EN 3114-002-2007

Aerospace series. Test method. Microstructure of (α + β) titanium alloy wrought products-Microstructure of bars, sections, forging stock and forgings
航空航天系列 测试方法 （a+？）钛合金锻造制品的微观结构 棒材、型材、锻坯和锻件的微观结构

2007-04-30

现行

ASTM A638/A638M-23

Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service
高温设备用沉淀硬化铁基高温合金棒材、锻件和锻坯的标准规范

2023-05-01

现行

BS 09/30181191 DC

BS 2B 23. Specification for copper-aluminium-nickel- iron alloy rods, sections, forging stock and forgings
BS 2B 23 铜铝镍铁合金棒材、型材、锻坯和锻件规范

2009-04-29

现行

BS 2L 83-1971

Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)
铝-铜-镍-镁-铁-硅合金（固溶处理和沉淀处理）的锻坯、棒材、挤压型材和锻件规范（Cu 2、Ni 1、Mg 1、Si 0.9、Fe 0.9）

1971-08-31

现行

ASTM B865-20

Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy Bar, Rod, Wire, Forgings, and Forging Stock
沉淀硬化镍铜铝合金棒材、棒材、线材、锻件和锻坯的标准规范

2020-10-01

现行

BS 7S 80-2002

High chromium-nickel corrosion resisting steel forging stock, bars, forgings and parts (880 to 1080 MPa: limiting ruling section 100 mm)
高铬镍耐蚀钢锻坯、棒材、锻件和零件（880至1080 MPa:极限截面100 mm）

2004-03-05

现行

ASTM B637-23

Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service
中高温用沉淀硬化和冷加工镍合金棒材、锻件和锻坯的标准规范

2023-12-01

现行

BS 09/30181195 DC

BS 3B 25. Specification for copper-nickel-silicon alloy rods, sections, forging stock, forgings and parts (heat treated)
BS 3B 25 铜镍硅合金棒材、型材、锻坯、锻件和零件（热处理）规范

2009-04-30

现行

BS S 162-1990

Specification for 18% nickel-cobalt-molybdenum maraging steel forging stock, forgings, bars and parts (1800 MPa: double vaccuum melted)
18%镍钴钼马氏体时效钢锻坯、锻件、棒材和零件规范（1800 MPa:双真空熔炼）

2005-10-17

现行

SAE AMS5931B

Steel, Wear, Galling, and Corrosion-Resistant Bars, Wire, Forgings, Extrusions, Mechanical Tubing, Rings, and Stock for Forgings, Rings, and Extruding 5.0Mn - 3.5Si - 16.5Cr - 5.0Ni - 0.14N Solution Heat Treated
经固溶热处理的耐磨、高凸和耐腐蚀棒材、线材、锻件、挤压件、机械卡套管、环件和锻件、环件及挤压件用坯料5.0Mn-3.5Si-165Cr-5.0Ni-0.14N

2023-10-16

现行

DIN EN 2954-002

Aerospace series - Macrostructure of titanium and titanium alloy wrought products - Part 002: Macrostructure of bar, section, forging stock and forgings; German and English version EN 2954-002:2010
航空航天系列.钛和钛合金锻制品的低倍组织.第002部分:棒材、型材、锻坯和锻件的低倍组织；德语和英语版本EN 2954-002:2010

2010-12-01

现行

ASTM B639-02(2018)

Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service
沉淀硬化含钴合金的标准规范（UNS R30155和UNS ；R30816）高温用棒材、棒材、锻件和锻坯

2018-11-01