ISO/IEC 9314的本部分规定了光纤分布式数据的站点管理（SMT） 接口（FDDI）。 FDDI提供高带宽（每秒100兆）的通用互连 使用光纤作为环形传输介质的计算机和外围设备 配置FDDI可以被配置为支持大约100%的持续传输速率 每秒80兆（10兆字节）。使用带有双Mac的双连接工作站允许 在无故障FDDI环的情况下，这些速率将加倍。 FDDI在分布在若干距离上的多个站点（节点）之间建立连接 绵延数公里。FDDI的默认值是根据1000个物理参数计算的 连接和总光纤路径长度为200公里。 FDDI包括 a） 物理层（PL），提供介质、连接器、光旁路、， 以及驾驶员/接收器要求。PL还定义了编码/解码和时钟 在介质上传输或传输数据所需的帧要求 FDDI的更高层。就ISO/IEC 9314的本部分而言， 根据物理层协议（PHY）和 物理层媒体相关（PMD）实体，即上层和下层 分别为PL的子层。 b） 一种数据链路层（DLL），用于控制介质和 生成和验证帧检查序列，以确保正确交付 将有效数据传输到更高的层。DLL还与生成和更新有关 识别FDDI中的设备地址和对等关联 网络在ISO/IEC 9314的本部分中，对DLL的引用如下: 根据最低的媒体访问控制（MAC）实体制造 DLL的子层。 c） 站点管理（SMT）标准，这是ISO/IEC 9314的一部分，提供 站（节点）级管理正在进行的过程所需的控制 在不同的FDDI层中，这样一个站可以作为一部分协同工作 FDDI网络。SMT应提供连接管理等服务， 站点插入和删除、站点初始化、配置管理、故障 隔离和恢复、外部授权的通信协议、调度 政策和统计数据的收集。 本文包含的SMT定义包括其提供和接收的一组服务 从中，包含在节点中的其他实体。在SMT中，这两方面的知识都存在 该节点和当前网络结构的唯一性，以确保该节点的功能 影响 FDDI的一套国际标准ISO/IEC 9314规定了接口、功能和功能 确保符合要求的FDDI实现之间的互操作性所需的操作。这部分 ISO/IEC 9314的功能描述。一致性实现可以采用任何设计 不违反互操作性的技术。

This part of ISO/IEC 9314 specifies the Station Management (SMT) for the Fibre Distributed Data Interface (FDDI). FDDI provides a high bandwidth (100 megabits per second) general purpose interconnection among computers and peripheral equipment using optical fibre as the transmission medium in a ring configuration. FDDI can be configured to support a sustained transfer rate of approximately 80 megabits (10 megabytes) per second. The use of dual attachment stations with dual MACs allows these rates to be doubled under the circumstance of a fault-free FDDI ring. FDDI establishes the connection among many stations (nodes) distributed over distances of several kilometres in extent. Default values for FDDI were calculated on the basis of 1 000 physical connections and a total fibre path length of 200 km. The FDDI consists of a) A Physical Layer (PL), which provides the medium, connectors, optical bypassing, and driver/receiver requirements. PL also defines encode/decode and clock requirements as required for framing the data for transmission on the medium or to the higher layers of the FDDI. For the purposes of this part of ISO/IEC 9314, references to the PL are made in terms of the Physical Layer protocol (PHY) and the Physical Layer Media Dependent (PMD) entities which are the upper and lower sublayers of PL, respectively. b) A Data Link Layer (DLL) which controls the accessing of the medium and the generation and verification of frame check sequences to assure the proper delivery of valid data to the higher layers. DLL also concerns itself with the generation and recognition of device addresses and the peer-to-peer associations within the FDDI network. For the purposes of this part of ISO/IEC 9314, references to the DLL are made in terms of the Media Access Control (MAC) entity which is the lowest sublayer of DLL. c) A Station Management (SMT) standard, this part of ISO/IEC 9314, which provides the control necessary at the station (node) level to manage the processes underway in the various FDDI layers such that a station may work cooperatively as a part of an FDDI network. SMT shall provide services such as connection management, station insertion and removal, station initialization, configuration management, fault isolation and recovery, communications protocol for external authority, scheduling policies, and collection of statistics. The definition of SMT as contained herein includes the set of services that it provides for, and receives from, the other entities that are contained within a node. Within SMT resides both knowledge of the uniqueness of this node and the current network structure to the extent that this node's function is affected. The set of International Standards for FDDI, ISO/IEC 9314, specifies the interfaces, functions and operations necessary to insure interoperability between conforming FDDI implementations. This part of ISO/IEC 9314 is a functional description. Conforming implementations may employ any design technique which does not violate interoperability.