BS ISO 23529:2016规定了制备、测量、标记、储存和测试的一般程序 其他国际标准中规定的物理试验用橡胶试件的调节， 以及试验期间使用的首选条件。适用于特定项目的特殊条件 不包括测试、材料或模拟特定气候环境，也不特殊 测试整个产品的要求。本文件还规定了两次成型之间的时间间隔要求 以及橡胶试件和产品的测试。这些要求对于获得可重复性是必要的 测试结果，以尽量减少客户和供应商之间的分歧。 交叉引用:ISO 525ISO 1382ISO 2393ISO 3302-1ISO 13385-1购买时可用的所有现行修订版均包含在本文件的购买中。

BS ISO 23529:2016 specifies general procedures for the preparation, measurement, marking, storage, and conditioning of rubber test pieces for use in physical tests specified in other International Standards, and the preferred conditions to be used during the tests. Special conditions, applicable to a particular test or material or simulating a particular climatic environment, are not included, nor are special requirements for testing whole products.This document also specifies the requirements for the time interval to be observed between forming and testing of rubber test pieces and products. Such requirements are necessary to obtain reproducible test results and to minimize disagreements between customer and supplier.Cross References:ISO 525ISO 1382ISO 2393ISO 3302-1ISO 13385-1All current amendments available at time of purchase are included with the purchase of this document.