IEC 60695-5-1:20 21 RLV包含官方IEC国际标准及其红线版本。Redline版本仅提供英文版本，为您提供了一种快速简单的方法来比较IEC官方标准与其以前版本之间的所有变化。 IEC 60695-5-1:20 21提供了以下方面的指导: a)腐蚀损伤试验方法的一般方面； b)腐蚀损伤的测量方法； c)测试方法的考虑； d)腐蚀损伤数据与危害评估的相关性。 本基本安全出版物主要供技术委员会根据IEC指南104和ISO/IEC指南51中规定的原则编写标准时使用。它不适合制造商或认证机构使用。技术委员会的职责之一是在适用的情况下，在编制其出版物时利用基本安全出版物。除非相关出版物中特别提及或包含，否则本基本安全性出版物的要求、试验方法或试验条件将不适用。本标准应与IEC TS 60695-5-2一起阅读。 第三版取消并取代了2002年出版的第二版，构成了技术修订。与上一版相比，此版本包括以下重大技术变更: a)已删除对IEC TS 60695-5-3（2014年撤回）的引用。 b)对IEC 60695-1-1的引用现在是对其替代品的引用:IEC 60695-1-10和IEC 60695-1-11。 c)ISO/TR 9122-1已由ISO 19706修订。 d)表1已更新。 e)已删除对ISO 11907-2和ISO 11907-3的引用。 f)术语和定义已更新。 g)6.4中的文本已更新。 h)参考书目已更新。

IEC 60695-5-1:2021 RLV contains both the official IEC International Standard and its Redline version. The Redline version is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.

IEC 60695-5-1:2021 provides guidance on the following:
a) general aspects of corrosion damage test methods;
b) methods of measurement of corrosion damage;
c) consideration of test methods;
d) relevance of corrosion damage data to hazard assessment.
This basic safety publication is primarily intended for use by technical committees in the preparation of standards in accordance with the principles laid down in IEC Guide 104 and ISO/IEC Guide 51. It is not intended for use by manufacturers or certification bodies. One of the responsibilities of a technical committee is, wherever applicable, to make use of basic safety publications in the preparation of its publications. The requirements, test methods or test conditions of this basic safety publication will not apply unless specifically referred to or included in the relevant publications. This standard is to be read in conjunction with IEC TS 60695-5-2.
This third edition cancels and replaces the second edition, published in 2002, and constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) References to IEC TS 60695-5-3 (withdrawn in 2014) have been removed.
b) References to IEC 60695-1-1 are now to its replacements: IEC 60695-1-10 and IEC 60695-1-11.
c) ISO/TR 9122-1 has been revised by ISO 19706.
d) Table 1 has been updated.
e) References to ISO 11907-2 and ISO 11907-3 have been removed.
f) Terms and definitions have been updated.
g) Text in 6.4 has been updated.
h) Bibliographic references have been updated.