本文件规定了手持式整体驱动内燃机树篱修剪机（以下简称“树篱修剪机”）设计和制造验证的安全要求和措施，该设备设计用于单个操作员在使用一个或多个直线往复切割机刀片时修剪树篱和灌木。 本文件也适用于“分动臂”型树篱修剪机和配置为树篱修剪机的多用途机器。 它建立了消除或减少因使用树篱修剪器而产生的危害的方法。此外，它还规定了制造商提供的关于安全工作实践的信息类型。 本文件涉及与电动手持树篱修剪机有关的所有重大危险、危险情况和事件，当它们按预期使用时，以及在制造商可合理预见的误用情况下（见第4条）。 本文件不适用于发动机排量超过80 cm的树篱修剪机，也不适用于出版日期之前制造的树篱修剪机。

This document specifies safety requirements and measures for the verification of the design and construction of hand-held, integrally-driven combustion engine hedge trimmers (hereafter referred to as "hedge trimmers") designed to be used by a single operator for trimming hedges and bushes while utilizing one or more linear reciprocating cutter blades. This document is also applicable to "split-boom" type hedge trimmers and to multi-purpose machines when configured as a hedge trimmer. It establishes methods for the elimination or reduction of hazards arising from the use of the hedge trimmers. In addition, it specifies the type of information to be provided by the manufacturer on safe working practices. This document deals with all significant hazards, hazardous situations and events relevant to powered hand-held hedge trimmers when they are used as intended and under the conditions of misuse that are reasonably foreseeable by the manufacturer (see Clause 4). This document is not applicable to hedge trimmers with an engine displacement over 80 cm³, nor is it applicable to hedge trimmers manufactured before the date of its publication.