ГОСТ Р 57857-2017-陶瓷复合材料单调加载下常温圆柱试样轴向拉伸强度和应力应变响应的测定-国家数字标准馆

现行 ГОСТ Р 57857-2017

到馆阅读

收藏跟踪

购买正版

Композиты керамические. Определение прочности при осевом растяжении и отклика напряжение-деформация при монотонном нагружении на цилиндрических образцах при нормальной температуре 陶瓷复合材料单调加载下常温圆柱试样轴向拉伸强度和应力应变响应的测定

实施日期： 2018-06-01

本标准适用于陶瓷复合材料，并规定了在单调单轴拉伸和正常温度下确定机械性能的方法。圆柱形试样

Настоящий стандарт распространяется на керамические композиты и устанавливает метод определения механических характеристик при монотонном одноосном растяжении и нормальной температуре цилиндрических образцов

分类信息

发布单位或类别：俄罗斯-俄罗斯国家标准

CCS分类： Q23建材 - 建材产品 - 纤维增强复合材料

ICS分类： 81.060.30陶瓷 - 高级陶瓷

关联关系

研制信息

起草单位： Общество с ограниченной ответственностью «Инновации будущего» совместно с Автономной некоммерческой организацией «Центр нормирования、 стандартизации и классификации композитов» при участии Объединения юридических лиц «Союз производителей композитов»

相似标准/计划/法规

BS EN 658-1-1998

Advanced technical ceramics. Mechanical properties of ceramic composites at room temperature-Determination of tensile strength
高级技术陶瓷室温下陶瓷复合材料的机械性能抗拉强度的测定

GOST R 57802-2017

Композиты керамические. Метод определения предела прочности при растяжении в направлении толщины образца при нормальной температуре
陶瓷复合材料室温下测定横向拉伸强度的试验方法

BS DD CEN/TS 15881-2009

Advanced technical ceramics. Ceramic composites. Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites
高级技术陶瓷陶瓷复合材料用微型复合材料拉伸试验测定室温下纤维/基体界面摩擦剪切应力

BS ISO 22459-2020

Fine ceramics (advanced ceramics, advanced technical ceramics). Reinforcement of ceramic composites. Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
精细陶瓷（高级陶瓷、高级工业陶瓷）陶瓷复合材料的增强环境温度下复丝束中长丝的拉伸强度和拉伸应变分布的测定

Fine ceramics (advanced ceramics, advanced technical ceramics) — Reinforcement of ceramic composites — Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature
精细陶瓷（高级陶瓷、高级工业陶瓷）——陶瓷复合材料的增强——环境温度下复丝束内长丝拉伸强度和断裂拉伸应变分布的测定

GOST R 57971-2017

Композиты керамические. Определение предела прочности при кольцевом растяжении при нормальной температуре на цилиндрических образцах с использованием эластомерных вставок
陶瓷复合材料弹性嵌件圆柱试样常温环向拉伸强度的测定

BS ISO 19604-2018

Fine ceramics (advanced ceramics, advanced technical ceramics). Mechanical properties of ceramic composites at high temperature. Determination of stress-rupture time diagram under constant tensile loading
精细陶瓷（高级陶瓷、高级工业陶瓷）陶瓷复合材料的高温力学性能恒定拉伸载荷下应力断裂时间图的确定

Fine ceramics (advanced ceramics, advanced technical ceramics) — Mechanical properties of ceramic composites at high temperature — Determination of stress-rupture time diagram under constant tensile loading
精细陶瓷（高级陶瓷高级工业陶瓷） - 高温下陶瓷复合材料的力学性能 - 恒定拉伸载荷下的应力 - 断裂时间图的测定

BS EN 1007-7-2010

Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements-Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
高级技术陶瓷陶瓷复合材料钢筋的试验方法

DIN EN ISO 22459

Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature (ISO 22459:2020)
精细陶瓷（高级陶瓷、高级工业陶瓷）.陶瓷复合材料的增强.在环境温度下测定多丝丝束中长丝的抗拉强度和断裂拉伸应变的分布（ISO 22459-2020）

Advanced technical ceramics - Ceramic composites - Determination of the fibre/matrix interfacial frictional shear stress at room temperature by tensile tests on mini-composites; German version CEN/TS 15881:2009
高级工业陶瓷.陶瓷复合材料.用小型复合材料拉伸试验测定室温下纤维/基体界面摩擦剪切应力；德文版CEN/TS 15881:2009

Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
高级工业陶瓷.陶瓷复合材料.增强材料的试验方法.第7部分:高温下多丝丝束中长丝的抗拉强度和断裂拉伸应变分布的测定

BS 08/30183873 DC

BS EN 1007-5. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Part 5. Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
英国标准EN 1007-5 高级技术陶瓷陶瓷复合材料钢筋的试验方法第五部分在环境温度下测定复丝丝束中长丝的抗拉强度和断裂拉伸应变分布

BS 09/30210248 DC

BS EN 1007-7. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Part 7. Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
英国标准EN 1007-7 高级技术陶瓷陶瓷复合材料钢筋的试验方法第七部分在高温下测定复丝丝束中长丝的拉伸强度和拉伸应变的分布

DIN CEN/TS 1007-7

Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at high temperature; German version CEN/TS 1007-7:2006
高级工业陶瓷.陶瓷复合材料.增强材料的试验方法.第7部分:高温下多丝丝束中长丝断裂抗拉强度和拉伸应变分布的测定；德文版CEN/TS 1007-7:2006

DIN EN 1007-7-DRAFT

Draft Document - Advanced technical ceramics - Ceramic composites - Methods of test for reinforcements - Part 7: Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature; German version FprEN 1007-7:2009
文件草案-文件草案-高级工业陶瓷-陶瓷复合材料-增强材料的试验方法-第7部分:高温下多丝丝束中长丝的抗拉强度和断裂拉伸应变分布的测定；德文版FprEN 1

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统