Specification for forging stock, bars, extruded sections and forgings of 99% aluminium
99%铝的锻坯、棒材、挤压型材和锻件规范

1985-12-31

Specification for forging stock, bars, extruded sections and forgings of aluminium-2¼% magnesium alloy
铝-2 3/16%镁合金锻坯、棒材、挤压型材和锻件规范

1985-12-31

Specification for bars and extruded sections of magnesium-6% aluminium-zinc alloy (not exceeding 150 mm diameter or minor sectional dimension) (Al 6.0, Zn 1.0)
镁-6%铝锌合金（直径不超过150mm或较小截面尺寸）棒材和挤压型材规范（铝6.0 锌1.0）

1973-03-15

Aluminium-copper-magnesium-silicon-manganese alloy bars and extruded sections (solution treated and aged at room temperature)
铝铜镁硅锰合金棒材和挤压型材（室温固溶处理和时效）

1952-08-31

Specification for copper-aluminium-nickel-iron alloy rods, bars, sections, forging stock and forgings
铜铝镍铁合金棒材、棒材、型材、锻坯和锻件规范

2009-11-30

Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
铝-铜-硅-镁合金（固溶处理和沉淀处理）的锻坯、棒材、挤压型材和锻件规范（Cu 1.5、Si 1、Mg 0.8）

1971-08-31

Specification for bars and extruded sections of magnesium-3% zinc-zirconium alloy (not exceeding 100 mm diameter or minor sectional dimension) (Zn 3.0, Zr 0.6)
镁-3%锌锆合金棒材和挤压型材规范（直径不超过100mm或较小截面尺寸）（Zn 3.0 Zr 0.6）

1973-03-15

Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝铜镁硅锰合金棒材和挤压型材规范（固溶处理和人工时效）（直径不超过200mm或较小截面尺寸）（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

1978-12-29

Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)
铝-铜-镍-镁-铁-硅合金（固溶处理和沉淀处理）的锻坯、棒材、挤压型材和锻件规范（Cu 2、Ni 1、Mg 1、Si 0.9、Fe 0.9）

1971-08-31

Specification for bars and extruded sections of magnesium-1¼% zinc-zirconium alloy (suitable for welding by inert-gas shielded arc techniques) (not exceeding 50 mm diameter or minor sectional dimension) (Zn 1.25, Zr 0.6)
镁-1 3/16%锌锆合金棒材和挤压型材规范（适用于惰性气体保护电弧技术焊接）（直径不超过50 mm或较小截面尺寸）（Zn 1.25 Zr 0.6）

1973-03-15

Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings to BS L 171) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
铝锌镁锰铜合金挤压、轧制或铸造锻坯规范（用于制造符合BS L 171的锻件）（Zn 5.7、Mg 2.7、Mn 0.5、Cu 0.5）（7014）

1990-01-31