SJ 2816.4-1987-Ｊ３Ａ型（电阻焊）晶体盒详细规范-国家数字标准馆

现行 SJ 2816.4-1987

到馆阅读

收藏跟踪

购买正版

Ｊ３Ａ型（电阻焊）晶体盒详细规范 Detail specification for (resistance-welded) crystal holders (enclosures) for Type J3A

发布日期： 1987-11-14

实施日期： 1988-07-01

分类信息

发布单位或类别：中国-行业标准-电子

CCS分类： L21电子元器件与信息技术 - 电子元件 - 石英晶体、压电元件

关联关系

研制信息

相似标准/计划/法规

Ｊ１Ａ型（电阻焊）晶体盒详细规范
Detail specification for (resistance-welded) crystal holders (enclosures) for Type J1A

Ｊ３Ｂ型（冷压焊）晶体盒详细规范
Detail specification for (cold-weld) crystal holders (enclosures) for Type J3B

BS 9612 N021-1979

Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
振荡器用电阻焊接密封石英晶体元件详细规范 DN、DZ、DQ和DP外壳频率范围为50至125 MHz 第五泛音厚度剪切模式切割时用于窄温度范围内的操作（温度控制）全面评估水平

BS 9612 N019-1979

Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
振荡器用电阻焊接密封石英晶体元件详细规范 DN、DZ、DQ和DP外壳频率范围为17至75 MHz 第三泛音厚度剪切模式切割时用于窄温度范围内的操作（温度控制）全面评估水平

BS 9612 N020-1979

Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
振荡器用电阻焊接密封石英晶体元件详细规范 DN、DZ、DQ和DP外壳频率范围为50至125 MHz 第五泛音厚度剪切模式切割时适用于宽温度范围（非温度控制）的操作全面评估水平

BS 9612 N018-1979

Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
振荡器用电阻焊接密封石英晶体元件详细规范 DN、DZ、DQ和DP外壳频率范围为17至75 MHz 第三泛音厚度剪切模式切割时用于宽温度范围（非温度控制）的操作全面评估水平

BS 9612 N017-1979

Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
振荡器用电阻焊接密封石英晶体元件详细规范 DN、DZ、DQ和DP外壳频率范围为0.8至20 MHz和3.0至30 MHz 基本厚度剪切模式切割时用于窄温度范围内的操作（温度控制）全速

BS 9612 N016-1979

Detail specification for resistance welded seal quartz crystal units for oscillator applications. DN, DZ, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
振荡器用电阻焊接密封石英晶体元件详细规范 DN、DZ、DQ和DP外壳频率范围为0.8至20 MHz和3.0至30 MHz 基本厚度剪切模式切割时适用于宽温度范围（非温度控制）的操作完全一样

BS 9612 N010-1979

Detail specification for cold welded seal quartz crystal units for oscillator applications. DK enclosure, 6.0 to 25 MHz frequency range. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
振荡器用冷焊密封石英晶体元件详细规范 DK外壳频率范围为6.0至25 MHz 基本厚度剪切模式切割时适用于宽温度范围（非温度控制）的操作全面评估水平

BS 9612 N007-1977

Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
振荡器用冷焊密封石英晶体元件详细规范 DN、DQ和DP外壳 17至75 MHz频率范围第三泛音厚度剪切模式切割时用于窄温度范围内的操作（温度控制）全面评估水平

BS 9612 N009-1977

Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
振荡器用冷焊密封石英晶体元件详细规范 DN、DQ和DP外壳频率范围为50至125 MHz 第五泛音厚度剪切模式切割时用于窄温度范围内的操作（温度控制）全面评估水平

BS 9612 N008-1977

Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 50 to 125 MHz frequency range. Fifth overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
振荡器用冷焊密封石英晶体元件详细规范 DN、DQ和DP外壳频率范围为50至125 MHz 第五泛音厚度剪切模式切割时适用于宽温度范围（非温度控制）的操作全面评估水平

BS 9612 N005-1977

Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over narrow temperature ranges (temperature controlled). Full assessment level
振荡器用冷焊密封石英晶体元件详细规范 DN、DQ和DP外壳频率范围为0.8至20 MHz和3.0至30 MHz 基本厚度剪切模式切割时用于窄温度范围内的操作（温度控制）全面评估

BS 9612 N006-1977

Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 17 to 75 MHz frequency range. Third overtone thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
振荡器用冷焊密封石英晶体元件详细规范 DN 47 U/2 DQ和DP外壳 17至75 MHz频率范围第三泛音厚度剪切模式切割时用于宽温度范围（非温度控制）的操作全面评估水平

BS 9612 N004-1977

Detail specification for cold welded seal quartz crystal units for oscillator applications. DN, 47 U/2, DQ and DP enclosures, 0.8 to 20 MHz and 3.0 to 30 MHz frequency ranges. Fundamental thickness-shear mode, AT-cut, for operation over wide temperature ranges (non-temperature controlled). Full assessment level
振荡器用冷焊密封石英晶体元件详细规范 DN、47 U/2、DQ和DP外壳频率范围为0.8至20 MHz和3.0至30 MHz 基本厚度剪切模式切割时适用于宽温度范围（非温度控制）的操作全速

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统