1.1 本规范涵盖不锈钢丝，自由加工类型除外。它包括圆形、方形、八边形、六边形和形状线 仅限线圈 适用于更常用的不锈钢类型，用于一般耐腐蚀和高温服务。对于拉直和切割长度的钢筋，请参见规范 1976年 或 A479/A479米 。 注1: 对于自由加工的不锈钢丝，专门为优化可加工性而设计，请参阅规范 581澳元/581澳元 。 1.2 除非订单规定了适用的“M”规格名称，否则材料应按英寸磅单位提供。 1.3 以国际单位制或英寸表示的数值- 磅单位应单独视为标准。每个系统中规定的值可能不是完全相等的；因此，每个系统应独立使用。将两个系统的值合并可能导致不符合标准。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This specification covers stainless steel wire, except the free-machining types. It includes round, square, octagon, hexagon, and shape wire in coils only for the more commonly used types of stainless steels for general corrosion resistance and high-temperature service. For bars in straightened and cut lengths, see Specifications A276 or A479/A479M . Note 1: For free-machining stainless wire, designed especially for optimum machinability, see Specification A581/A581M . 1.2 Unless the order specifies the applicable “M” specification designation, the material shall be furnished to the inch-pound units. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.