BS L 64:1952-铝铜镁硅锰合金棒材和挤压型材（室温固溶处理和时效）-国家数字标准馆

现行 BS L 64:1952

到馆提醒

收藏跟踪

购买正版

Aluminium-copper-magnesium-silicon-manganese alloy bars and extruded sections (solution treated and aged at room temperature) 铝铜镁硅锰合金棒材和挤压型材（室温固溶处理和时效）

发布日期： 1952-08-31

购买本文件时可获得的所有当前修订均包含在购买本文件中。

All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

ALCAN 2027 T3511: Aluminum-Copper-Magnesium, Manganese-Zirconium Alloy Extruded Bar
加拿大铝业2027 T3511:铝铜镁锰锆合金挤压棒材

ALCAN 2027 T3511: Aluminum-Copper-Magnesium, Manganese-Zirconium Alloy Extruded Bar
加拿大铝业2027 T3511:铝铜镁锰锆合金挤压棒材

Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-silicon-magnesium alloy (solution treated and precipitation treated) (Cu 1.5, Si 1, Mg 0.8)
铝-铜-硅-镁合金（固溶处理和沉淀处理）的锻坯、棒材、挤压型材和锻件规范（Cu 1.5、Si 1、Mg 0.8）

Specification for bars and extruded sections of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (not exceeding 200 mm diameter or minor sectional dimension) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝铜镁硅锰合金棒材和挤压型材规范（固溶处理和人工时效）（直径不超过200mm或较小截面尺寸）（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
镀铝铝铜镁硅锰合金（固溶处理和人工时效）精密公差薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）

Specification for forging stock, bars, extruded sections and forgings of aluminium-copper-nickel-magnesium-iron-silicon alloy (solution treated and precipitation treated) (Cu 2, Ni 1, Mg 1, Si 0.9, Fe 0.9)
铝-铜-镍-镁-铁-硅合金（固溶处理和沉淀处理）的锻坯、棒材、挤压型材和锻件规范（Cu 2、Ni 1、Mg 1、Si 0.9、Fe 0.9）

Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金（固溶处理和沉淀处理）的锻坯和锻件规范（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

Specification for plate of aluminium-copper-magnesium-silicon-manganese alloy (solution treated, controlled stretched and precipitation treated) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝铜镁硅锰合金板材规范（固溶处理、控制拉伸和沉淀处理）（Cu 4.4、Mg 0.5、Si 0.7、Mn 0.8）

Specification for close toleranced sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
铝涂层铝-铜-镁-硅-锰合金（室温固溶处理和时效）的精密薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）

Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and artificially aged) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
铝-铜-镁-硅-锰合金（固溶处理和人工时效）精密薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）

Specification for forging stock and forgings of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金（室温固溶处理和时效）的锻坯和锻件规范（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

Specification for extruded, rolled or cast forging stock of aluminium-zinc-magnesium-manganese-copper alloy (for manufacture of forgings to BS L 171) (Zn 5.7, Mg 2.7, Mn 0.5, Cu 0.5) (7014)
铝锌镁锰铜合金挤压、轧制或铸造锻坯规范（用于制造符合BS L 171的锻件）（Zn 5.7、Mg 2.7、Mn 0.5、Cu 0.5）（7014）

Specification for sheet and strip of aluminium-coated aluminium-copper-magnesium-silicon-manganese alloy (solution treated, cold worked for flattening and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
铝涂层铝-铜-镁-硅-锰合金薄板和带材规范（固溶处理、冷加工以压扁并在室温下时效）（Cu 4.4、Mg 0.5、Si 0.8、Mn 0.8）

Specification for close toleranced sheet and strip of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (Cu 4.4, Mg 0.5, Si 0.8, Mn 0.8)
铝-铜-镁-硅-锰合金（室温固溶处理和时效）的精密薄板和带材规范（Cu 4.4 Mg 0.5 Si 0.8 Mn 0.8）

Specification for tube of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and aged at room temperature) (not exceeding 10 mm wall thickness) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金管规范（室温固溶处理和时效）（壁厚不超过10 mm）（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）

Specification for wire for solid cold-forged rivets of aluminium-copper-magnesium-silicon-manganese alloy (for use in the solution treated and naturally aged condition) (not exceeding 10 mm diameter) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8) (2014A)
铝-铜-镁-硅-锰合金（固溶处理和自然时效条件下使用）（直径不超过10 mm）实心冷锻铆钉用线材规范（Cu 4.4 Mg 0.5 Si 0.7 Mn 0.8）（2014A）

Specification for hexagonal bars for nuts, couplings and hollow machined parts of aluminium-copper-magnesium-silicon-manganese alloy (solution treated and precipitation treated) (free from peripheral and asymmetric coarse grain) (not less than 14 mm nor more than 36 mm across flats) (Cu 4.4, Mg 0.5, Si 0.7, Mn 0.8)
铝-铜-镁-硅-锰合金（固溶处理和沉淀处理）螺母、联轴器和空心机加工零件用六角棒规范（无周边和不对称粗晶）（平面宽度不小于14 mm 也不大于36 mm）（Cu 4.4 Mg 0.5

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统