KS M ISO 11125-5-2002(2017)-涂料和有关产品使用前钢基体的制备金属喷砂清理磨料的试验方法第5部分:缺陷颗粒百分比和微观结构的测定 -国家数字标准馆

现行 KS M ISO 11125-5-2002(2017)

到馆提醒

收藏跟踪

购买正版

도료와 관련 제품의 도장 전 강판 기재의 표면 처리-금속 블라스트 세정용 연마제의 시험 방법-제5부:결함 입자 백분율과 미세 구조의 측정 涂料和有关产品使用前钢基体的制备金属喷砂清理磨料的试验方法第5部分:缺陷颗粒百分比和微观结构的测定

发布日期： 2002-12-31

该规格规定了金属毛坯清洗用研磨剂缺陷颗粒百分比测定和微细结构测定的试验方法。金属研磨剂的形态和对它们各自的质量条件包括在ISO11124系列内。ISO 11124及ISO 11125规格被拟订为金属研磨剂的统一国际规格。有关这些规格的信息在附件A中有描述。

이 규격은 금속 블라스트 세정용 연마제의 결함 입자 백분율 측정과 미세 구조 측정을 위한 시험 방법 에 대하여 규정한다. 금속 연마제의 형태와 이들 각각에 대한 품질 조건들은 ISO 11124 시리즈 내에 포함되어 있다. ISO 11124 및 ISO 11125 규격이 금속 연마제의 통일된 국제 규격으로 입안되었다. 이들 규격에 관한 정 보는 부속서 A에 기술되어 있다.

分类信息

发布单位或类别：韩国-韩国标准

ICS分类： 25.220.10表面处理和镀涂 - 表面预处理

关联关系

研制信息

相似标准/计划/法规

BS 7079-F9-1999

Preparation of steel substrates before application of paints and related products. Specification for Staurolite
涂料和相关产品使用前钢衬底的制备十字石规范

General introduction to standards for preparation of steel substrates before application of paints and related products
涂料和相关产品使用前钢衬底制备标准概述

BS EN ISO 8504-1-2019

Preparation of steel substrates before application of paints and related products. Surface preparation methods-General principles
涂料和相关产品使用前钢衬底的制备表面处理方法

GB/T 18839.1-2002

涂覆涂料前钢材表面处理表面处理方法总则
Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles

BS EN ISO 8504-2-2019

Preparation of steel substrates before application of paints and related products. Surface preparation methods-Abrasive blast-cleaning
涂料和相关产品使用前钢衬底的制备表面处理方法

GB/T 18839.2-2002

涂覆涂料前钢材表面处理表面处理方法磨料喷射清理
Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning

BS EN ISO 8504-3-2018

Preparation of steel substrates before application of paints and related products. Surface preparation methods-Hand- and power-tool cleaning
涂料和相关产品使用前钢衬底的制备表面处理方法

ISO 8504-4-2022

Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 4: Acid pickling
涂料和相关产品使用前钢衬底的制备.表面制备方法.第4部分:酸洗

KS M ISO 8504-1(2017 Confirm)

도료 및 관련 제품의 도장 전 철강 소지 조정－표면 조정 방법－제1부：일반 원리
涂料和有关产品使用前钢基体的制备表面处理方法第1部分:总则

KS M ISO 8504-1

도료 및 관련 제품의 도장 전 철강 소지 표면처리 — 표면처리 방법 —제1부: 일반 원리
涂料和相关产品使用前钢衬底的制备.表面制备方法.第1部分:一般原则

GB/T 18839.3-2002

涂覆涂料前钢材表面处理表面处理方法手工和动力工具清理
Preparation of steel substrates before application of paints and related products--Surface preparation methods--Hand-and power-tool cleaning

ISO 8504-1-2019

Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 1: General principles
油漆及相关产品应用前钢基材料的制备 - 表面处理方法 - 第1部分:一般原则

ISO 8504-5-2024

Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 5: Water jet cleaning
涂料和相关产品应用前钢基材的制备——表面处理方法——第5部分:喷水清洗

KS M ISO 8504-2(2017 Confirm)

도료 및 관련 제품의 도장 전 철강 소지 조정－표면 조정 방법－제2부：연마재 마찰 세정
涂装涂料和有关产品前钢材表面处理表面处理方法第2部分:喷砂清理

ISO 8504-2-2019

Preparation of steel substrates before application of paints and related products — Surface preparation methods — Part 2: Abrasive blast-cleaning
涂料和相关产品之前制备钢基材 - 表面处理方法 - 第2部分:磨料喷砂清洗

BS ISO 11124-5-2019

Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives-Cut steel wire
涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料规范

BS EN ISO 11124-5-2021

Preparation of steel substrates before application of paints and related products. Specifications for metallic blast-cleaning abrasives-Cut steel wire
涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料规范

BS EN ISO 11126-8-2018

Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives-Olivine
涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料规范

BS EN ISO 11126-9-2004

Preparation of steel substrates before application of paints and related products. Specifications for non-metallic blast-cleaning abrasives-Staurolite
涂料和相关产品使用前钢衬底的制备非金属喷砂清理磨料规范

BS EN ISO 11125-1-2018

Preparation of steel substrates before application of paints and related products. Test methods for metallic blast-cleaning abrasives-Sampling
涂料和相关产品使用前钢衬底的制备金属喷砂清理磨料的试验方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统