ISO 9445规定了厚度小于等于3 mm且轧制宽度小于600 mm的连续冷轧不锈钢窄带的尺寸和形状公差。它也适用于从此类带材上取下的切割长度。 本国际标准还规定了连续冷轧不锈钢宽带和钢板/薄板的尺寸和形状公差，厚度为0.3 mm至8.0 mm，通过纵向纵切从宽带制造，以及从此类宽带制造的切割长度。

ISO 9445 specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel narrow strip, in thicknesses of up to and including 3 mm and in rolling widths of less than 600 mm. It also applies to cut lengths taken from such strip. This International Standard also specifies the tolerances on dimensions and form for continuously cold-rolled stainless steel wide strip and plate/sheet, in thicknesses from 0,3 mm to 8,0 mm manufactured from wide strip by longitudinal slitting and to cut lengths manufactured from such strip.