1.1本规范涵盖了撑杆跳着陆系统的尺寸、材料物理特性、标准测试程序、标签和标识的最低要求。 1.2 单位 — 以国际单位制或英寸-磅单位表示的数值应单独视为标准值。每个系统中规定的值可能不是精确的等效值；因此，每个系统应相互独立使用。将两个系统的值合并可能会导致不符合标准。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 使用本规范中给出的程序获得的动态数据测量了所测试撑杆跳着陆系统的缓冲性能。 撑杆跳着陆系统的尺寸是根据身体运动的运动学来指定的。

1.1 This specification covers minimum requirements of size, physical characteristics of materials, standard testing procedures, labeling and identification of pole vault landing systems. 1.2 Units — The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems may result in non-conformance with the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== The dynamic data obtained with the procedures given in this specification measure the cushioning properties of the pole vault landing systems tested. The size of the pole vault landing system is specified with respect to the kinematics of body movement.