自2007年6月起，SAE航空航天材料部已宣布本规范“取消”，并已被AMS 2300取代。每当提及已取消的MAM 2300时，应满足最新版AMS 2300的要求。通过这一行动，本文件将保留在航空航天材料规范索引的数字部分中，并注明其已被AMS 2300取代。本规范涵盖了通过磁粉检测方法对优质飞机用铁磁钢（不包括可硬化耐腐蚀钢）的清洁度要求，单位为公制（SI）。AMS 2300是该MAM的英寸/磅版本。该程序通常用于评估铸坯、坯料、圆管、锻造或闪光焊接环、板、棒、板、管和挤压件的清洁度，用于制造高强度钢- 应力零件，在此类零件的最终检验中使用了非常严格的磁粉检验标准，但可用于鉴定一炉、一炉或一批钢。

This specification has been declared "CANCELLED" by the Aerospace Materials Division, SAE, as of June 2007, and has been superseded by AMS 2300. The requirements of the latest issue of AMS 2300 shall be fulfilled whenever reference is made to the cancelled MAM 2300. By this action, this document will remain listed in the Numerical Section of the Index of the Aerospace Materials Specifications noting that is it superseded by AMS 2300. This specification covers steel cleanliness requirements in metric (SI) units for premium aircraft-quality ferromagnetic steels, other than hardenable, corrosion-resistant steels, by magnetic particle inspection methods.AMS 2300 is the inch/pound version of this MAM.This procedure has been used typically for the cleanliness evaluation of blooms, billets, tube rounds, stock for forging or flash welded rings, slabs, bars, plate, tubing, and extrusions used in fabricating highly-stressed parts where very strict magnetic particle inspection standards are used in final inspection of such parts, but may be used for qualification of a heat, melt or lot of steel.