1.1 本消费者安全规范涵盖了确保箱子安全的性能要求和测试方法。 1.2 本消费者安全规范旨在最大限度地减少正常使用和合理预见的误用或滥用这些箱子对儿童造成的事故和伤害。 1.3 本消费者安全规范适用于通常被称为雪松箱、希望箱、毛毯箱和纪念品箱的产品，或设计和销售为衣服、毛毯、亚麻布、纪念品或其他家用物品密封存储容器的其他类似封闭硬盒。符合这些要求的产品包括: 1.3.1 单个体积为1.1英尺的 3. （0.031米 3. )或更大，从产品中移除所有可移动的货架或隔间，以及 1.3.2 当盖子关闭时，为了防止昆虫侵扰和灰尘或污垢污染，旨在创造一个紧密密封的存储空间。 1.4 在本消费者安全规范批准日期后生产的箱子，除非符合本规范中包含的所有要求，否则不得通过标签或其他方式表明符合本规范。 1.5 以英寸-磅为单位的数值应视为标准值。 括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.6 以下预防性警告仅适用于试验方法部分第节 5. ，本规范: 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This consumer safety specification covers the performance requirements and test methods to ensure the safety of chests. 1.2 This consumer safety specification is intended to minimize the incidents and injuries to children resulting from normal use and reasonably foreseeable misuse or abuse of these chests. 1.3 This consumer safety specification applies to products commonly known as cedar chests, hope chests, blanket chests, and keepsake chests, or other similar closed rigid boxes designed and marketed as sealed storage containers for clothes, blankets, linens, keepsake or other household items. Products subject to these requirements are: 1.3.1 Those with a single volume of 1.1 ft 3 (0.031 m 3 ) or more measured with all removable shelves or compartments removed from the product, and 1.3.2 Those intended to create a tightly sealed storage space when the lid is closed for purposes such as the prevention of insect infestation and dust or dirt contamination. 1.4 No chest produced after the approval date of this consumer safety specification shall, either by label or other means, indicate compliance with this specification unless it conforms to all requirements contained herein. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following precautionary caveat pertains only to the test methods portion, Section 5 , of this specification: This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.