IEC 61975:2010+AMD1:2016+AMD2:2022适用于高压直流（HVDC）装置的系统测试，该装置由发送终端和接收终端组成，每个终端连接到交流系统。本标准中规定的试验基于双向和双极高压直流（HVDC）装置，该装置由一个发送端和一个接收端组成，每个连接到交流系统。测试要求和验收标准应在- 本标准不包括多终端系统和电压源转换器。对于单极高压直流装置，本标准适用于双极试验除外。本标准仅作为高压直流（HVDC）装置系统测试的指南。该标准为潜在用户提供了关于如何计划调试活动的指导。指南中描述的测试可能不适用于所有项目，但代表了应考虑的一系列可能的测试。 本版取消并取代了IEC和CIGRé于2004年联合发布的IEC/PAS 61975。它构成了结合工程经验的技术修订。

IEC 61975:2010+AMD1:2016+AMD2:2022 applies to system tests for high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The tests specified in this standard are based on bidirectional and bipolar high-voltage direct current (HVDC) installations which consist of a sending terminal and a receiving terminal, each connected to an a.c. system. The test requirements and acceptance criteria should be agreed for back-to-back installations, while multi-terminal systems and voltage sourced converters are not included in this standard. For monopolar HVDC installations, the standard applies except for bipolar tests. This standard only serves as a guideline to system tests for high-voltage direct current (HVDC) installations. The standard gives potential users guidance, regarding how to plan commissioning activities. The tests described in the guide may not be applicable to all projects, but represent a range of possible tests which should be considered. This edition cancels and replaces IEC/PAS 61975 published jointly in 2004 by IEC and CIGRé. It constitutes a technical revision incorporating engineering experience.