本文件已被宣布为“稳定”，不再接受货币定期审查。用户负责验证参考和持续适用性或技术要求。可能存在新技术。本航空航天标准（AS）为2.44 m（8 ft）宽的托盘提供了尺寸、结构和环境要求，该托盘将用于货船版本的认证飞机，该飞机配备有对按照NAS 3610 II类约束系统要求测试的托盘进行约束的设备。它还打算与AS832中描述的2.44 m x 2.44 m（8 ft x 8 ft）横截面容器兼容。C型适配器托盘旨在与ANSI MH 5.1《货运集装箱》和ISO 1496系列1《货运集装箱”中所述的2.44 m x 2.44 m（8 ft x 8 ft）横截面集装箱兼容。 AS1131中描述了与这些托盘一起使用的托盘网。使用关键词“应”确定最低基本标准。推荐标准是通过使用关键词“应该”来确定的，虽然不是强制性的，但在提供可用、经济和实用的空运托盘方面，推荐标准被认为是最重要的。只有在仔细考虑、广泛测试和彻底的服务评估表明替代方法令人满意后，才能出现与推荐标准的偏差。

This document has been declared "Stabilized" and will no longer be subjected to periodic reviews for currency. Users are responsible for verifying references and continued suitability or technical requirements. New technology may exist.This Aerospace Standard (AS) provides dimensional, structural, and environmental requirements for 2.44 m (8 ft) wide pallets to be used in freighter versions of certificated aircraft equipped to provide restraint to pallets tested to the requirements of NAS 3610 Class II restraint system. It is also intended to be compatible with 2.44 m x 2.44 m (8 ft x 8 ft) cross section containers described in AS832. The Type C adapter pallet is intended to be compatible with 2.44 m x 2.44 m (8 ft x 8 ft) cross section containers described in ANSI MH 5.1, Cargo Containers and ISO 1496 Series 1, Freight Containers. Pallet nets used in conjunction with these pallets are described in AS1131. The minimum essential criteria are identified by use of the key word "shall". Recommended criteria are identified by use of the key word "should", and while not mandatory, are considered to be of primary importance in providing serviceable, economical, and practical air transport pallets. Deviation from recommended criteria should occur only after careful consideration, extensive testing, and thorough service evaluation have shown alternate methods to be satisfactory.