ETSI EN 300 296-2涵盖了避免有害干扰所需的最低特性 以及可接受地利用可用频率。本文件适用于陆地移动通信系统角度调制系统中使用的带集成天线的设备 服务，在30 MHz和1000 MHz之间的无线电频率上运行，信道间隔为12,5 kHz和20 kHz 和25kHz，主要用于模拟语音。在本文件中，对不同的射频频段、信道分离、， 环境条件和设备类型（如适用）。本文件是对EN 300 086[i.4]的补充，该标准涵盖了带有内部或外部接口的无线电设备 射频连接器，用于陆地移动服务。本文件可适用于CEPT/ERC/DEC（98）25[i.6]中定义的PMR446设备。请注意，PMR446 设备要求包含接收器，并且可能要求最大传输时间为180秒 还有VOX。

ETSI EN 300 296-2 covers the minimum characteristics considered necessary in order to avoid harmful interference and to make acceptable use of the available frequencies.The present document applies to equipment with integral antennas, used in angle modulation systems in the land mobile service, operating on radio frequencies between 30 MHz and 1 000 MHz, with channel separations of 12,5 kHz, 20 kHz and 25 kHz, and is intended primarily for analogue speech.In the present document different requirements are given for the different radio frequency bands, channel separations, environmental conditions and types of equipment, where appropriate.The present document is complementary to EN 300 086 [i.4], which covers radio equipment with an internal or external RF connector, for use in the land mobile service.The present document may apply to PMR446 equipment as defined in CEPT/ERC/DEC(98)25 [i.6]. Note that PMR446 equipment has a requirement to incorporate a receiver and may have requirements for 180 s maximum transmission time and VOX.