Specification for chromium-nickel corrosion-resisting steel - bright bars and parts (540 MPa, limiting ruling section 160 mm) (Cr 18, Ni 10.5, controlled nitrogen content)
铬镍耐蚀钢规范.光亮棒材和零件（540MPa 极限截面160mm）（Cr 18 Ni 10.5 受控氮含量）

1990-09-28

Specification for high chromium-nickel corrosion-resisting steel bright bars (free machining) (880-1080 MPa: limiting ruling section 70 mm)
高铬镍耐腐蚀光亮钢棒规范（自由加工）（880-1080 MPa:极限截面70 mm）

1976-08-31

Specification for chromium-nickel-molybdenum corrosion-resisting steel. Bright bars and parts (540 MPa, limiting ruling section 160 mm) (Cr 17.5, Ni 12.5, Mo 2.25, controlled nitrogen content)
铬镍钼耐蚀钢规范 亮条和零件（540 MPa 极限截面160 mm）（Cr 17.5 Ni 12.5 Mo 2.25 控制氮含量）

1990-09-28

Specification for aircraft material. '40' carbon steel bright bars for machining (55-65 tonf/sq in: limiting ruling section ¾ inch) (primarily intended for the manufacture of machined bolts)
飞机材料规范加工用40’碳钢光亮棒（55-65吨/平方英寸:限制划线截面3/4英寸）（主要用于制造加工螺栓）

1964-01-31

Specification for aircraft material. '40' carbon steel bright bars for machining (45-55 tonf/sq in: limiting ruling section 1 inch) (primarily intended for the manufacture of nuts)
飞机材料规范加工用40’碳钢光亮棒（45-55吨/平方英寸:限制截面1英寸）（主要用于制造螺母）

1964-01-31

Specification for aircraft material. Semi-free cutting carbon steel, bright bars for machining (40-50 tonf/sq in: maximum size ½ inch diameter or minor sectional dimension) (primarily intended for the manufacture of nuts)
飞机材料规范 半易切削碳钢 加工用光亮棒材（40-50吨/平方英寸:最大尺寸1/2英寸直径或较小截面尺寸）（主要用于制造螺母）

1964-01-31