BS ISO 29584:2015的目的是通过软体碰撞器评估安全性 用于减少切割和刺穿伤人的玻璃制品的破损特性 通过意外的撞击。本国际标准检查了目前用于确定摆锤的试验方法 安全玻璃的冲击性能。使用本国际标准中的方法可以提高 测试结果的再现性，并提供了一个共同的分类基础。目的是为了 更好地了解各国制造和测试的玻璃产品的性能 而且更加一致。定义了两种类型的软体碰撞器。传统的弹丸袋冲击器详细说明如下: 制造和维护条款，以解决与此类设备相关的问题 撞击器变得畸形。还详细介绍了双轮胎碰撞器。还描述了试验设备，不包括冲击器。本文介绍了一种校准测试架的方法 鉴于校准测试设备的好处是增加了测试结果的再现性。 玻璃制品的分类也很详细。分类系统允许提供有关 下面给出:玻璃未破裂或安全破裂时的最大跌落高度，即 与夹层玻璃或钢化玻璃相似；玻璃破裂的方式，即钢化玻璃、夹层玻璃、退火玻璃、， 无论玻璃在试验过程中是否破裂；玻璃未破裂或安全破裂时的最大跌落高度，即。 e、 以某种方式 类似夹层玻璃。本国际标准未规定产品的预期用途，但提供了一种方法 根据被测试材料的性能进行分类。撞击能量用于 不同级别的分类旨在为预期用户或立法者提供 有助于确定与预期用途相关的安全和保护等级的信息 使用所选安全玻璃的位置。交叉引用:ISO 48ISO 2408ISO 4251-1ISO 6345:1990ISO 12543-1:2011ISO 12543-2ISO 16293-1EN 12600购买本文件时提供的所有当前修订版均包含在购买本文件中。

The purpose of BS ISO 29584:2015 is to evaluate, by means of soft body impactors, safe breakage characteristics of glazing products intended to reduce cutting and piercing injuries to persons through accidental impact.This International Standard examines test methods currently employed to determine the pendulum impact performance of safety glass. Use of the methodologies in this International Standard improves the reproducibility of test results and gives a common basis of classification. The aim is for the performance of glass products manufactured and tested in various countries to be better understood and more consistent.Two types of soft body impactors are defined. The traditional shot bag impactor is detailed both in terms of manufacture and maintenance in an attempt to overcome problems associated with such impactors becoming misshapen. The twin tyre impactor is also detailed.The test equipment, excluding the impactor, is also described. A method of calibrating the test frame is given. The benefit of calibrating the test equipment is the increased reproducibility of the test results. Classification of glass products is also detailed. The classification system allows information on the following to be given:the maximum drop height at which the glass either did not break or broke safely, i.e. in a manner similar to laminated glass or toughened glass;the manner in which the glass would break, i.e. as toughened glass, laminated glass, annealed glass, irrespective of whether or not the glass was broken during the test;the maximum drop height at which the glass either did not break or broke safely, i.e. in a manner similar to laminated glass.This International Standard does not specify the intended use of the products, but provides a method of classification in terms of the performance of the materials being tested. The impact energy used for the various levels of classification are designed to provide the intended user or the legislator with the information to assist in defining the level of safety and protection required relative to the intended location at which the selected safety glass is to be used.Cross References:ISO 48ISO 2408ISO 4251-1ISO 6345:1990ISO 12543-1:2011ISO 12543-2ISO 16293-1EN 12600All current amendments available at time of purchase are included with the purchase of this document.