本标准规定了安全性、耐久性和结构充分性的尺寸和性能要求 办公桌/桌子和存储产品的独立组件，包括工作台系统。垂直锉削 就本标准而言，机柜不被视为存储产品，本标准不包括机柜。本标准还提供了尺寸和调整要求，这些要求符合公认的人体工程学 指南或标准，如CAN/CSA-ISO 9241-5-00（R2016）、BIFMA G1-2013、CAESAR FINAL的指南或标准 报告第一卷和第二卷，2002年6月，作为人体测量数据的来源。 尺寸和调整要求 目的解决第5至95百分位成人办公室工作人员的估计需求。测量桌面产品和组件以及评估其性能的选定方法如下: 基于加拿大通用标准委员会成员的实际现场和产品测试经验 独立办公桌产品和组件委员会。本标准中使用的数量和尺寸以公制单位给出，括号中显示了英制单位 如果合适的话。如有争议，公制单位应视为官方单位。 根据本标准对产品进行测试和评估可能需要使用材料和/或设备 这可能很危险。本文件并未涉及与其使用相关的所有安全方面。 使用本标准的任何人都有责任咨询相关部门，并建立健康和安全体系 使用前的安全规程以及任何适用的监管要求。

This standard provides dimensional and performance requirements for safety, durability and structural adequacy of free-standing components of office desk/table and storage products, including benching systems. Vertical filing cabinets are not considered storage products for the purpose of this standard and are not covered in this standard.This standard also provides dimensional and adjustment requirements that respect generally accepted ergonomics guidelines or standards, such as those of CAN/CSA-ISO 9241-5-00(R2016), BIFMA G1-2013, CAESAR FINAL REPORT Vol. I and II, June 2002 as its source of anthropometric data. The dimensional and adjustment requirements aim to address the estimated needs of the 5th to 95th percentile of adult office workers.The selected methods for measuring desk products and components and for assessing their performance are based on the actual field and product-testing experience of the members of the Canadian General Standards Board Committee on Free-standing Office Desk Products and Components.Quantities and dimensions used in this standard are given in metric units with imperial equivalents shown in brackets where appropriate. The metric units shall be regarded as official in the event of dispute.The testing and evaluation of a product against this standard may require the use of materials and/or equipment that could be hazardous. This document does not purport to address all the safety aspects associated with its use. Anyone using this standard has the responsibility to consult the appropriate authorities and to establish health and safety practices in conjunction with any applicable regulatory requirements prior to its use.