IEC 60076的本部分适用于使用强制水和强制液体回路的液-水热交换器，用于符合IEC 60076-1要求的液浸式电力变压器和符合IEC 60076-6要求的电抗器，室内或室外安装时带或不带储油柜。它概述了该设备常见的使用条件和机械和电气要求。 它还概述了该设备的具体操作要求，以及与互换性相关的首选尺寸，以及要进行的型式试验和常规试验。交叉引用:IEC 60076-1ISO 4406EN 60076-1IEC 60296EN 60296ISO 12944IEC 60529IEC 60076-7EN ISO 12944EN 10025-2ISO 9001EN 10027-1EN 12502-1ISO 3506-1EN 12451EN 10088-2EN 60076-6EN 12452EN ISO 9001EN 1561ISO 7005-1EN 1653IEC 60076-6EN ISO 3506-1购买本文件时可提供的所有现行修订。

This part of IEC 60076 applies to liquid to water heat exchangers, using forced water and forced liquid circuits, used on liquid immersed power transformers according to IEC 60076-1 and reactors according to IEC 60076-6 with and without conservator for indoor or outdoor installation. It outlines the service conditions and the mechanical and electrical requirements that are common to this equipment. It also outlines the operation requirements specific to this equipment as well as the preferred dimensions relevant for interchangeability and the type and routine tests to be performed.Cross References:IEC 60076-1ISO 4406EN 60076-1IEC 60296EN 60296ISO 12944IEC 60529IEC 60076-7EN ISO 12944EN 10025-2ISO 9001EN 10027-1EN 12502-1ISO 3506-1EN 12451EN 10088-2EN 60076-6EN 12452EN ISO 9001EN 1561ISO 7005-1EN 1653IEC 60076-6EN ISO 3506-1All current amendments available at time of purchase are included with the purchase of this document.