1.1 本规程涵盖了将水乳液地板抛光剂在测试地板上的性能与参考材料进行比较。适用于以下类型的抛光: 1.1.1 蜡乳液抛光剂， 1.1.2 非抛光乳液抛光剂， 1.1.3 家用耐洗涤剂乳液抛光剂和 1.1.4 工业型耐洗涤剂乳液抛光剂。 1.2 与参考材料相比，这些类型的地板抛光剂的光泽、平整度、变色、交通标志、防滑性和易去除性都得到了评定。在适用的情况下，还评估了耐洗涤剂性。 此方法不被视为推荐的维护程序。 1.3 以英寸-磅为单位的数值应视为标准值。括号中给出的值仅供参考。 1.4 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.5 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 1.6 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 3.1 在比较不同地板抛光剂的实际现场性能时，重要的是所有使用的表面应以相同的方式处理。当遵循该程序时，测试表面的变化最小。

1.1 This practice covers the comparison of the performance of water-emulsion floor polishes on test floors against a reference material. It is applicable to the following types of polishes: 1.1.1 Wax emulsion polishes, 1.1.2 Nonbuffable emulsion polishes, 1.1.3 Detergent-resistant emulsion polishes, household type, and 1.1.4 Detergent-resistant emulsion polishes, industrial type. 1.2 Gloss, leveling, discoloration, traffic marking, slip resistance, and removal ease of these types of floor polishes is rated in comparison to a reference material. Where applicable, detergent resistance is also evaluated. This method is not to be considered as a recommended maintenance procedure. 1.3 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. 1.6 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 When comparing different floor polishes for an actual field performance, it is important that all surfaces used be prepared in the same way. When this procedure is followed, variations in the test surfaces are minimized.