概述:描述了在分子设备的ThermoMax微孔板读卡器上执行日常维护和校准检查的程序。适用于位于QC实验室的ThermoMax microplate reader。包括每周验证过滤器、校准、线性和精度的说明，以及更换灯和保险丝的说明。包括的章节:目的、范围、责任、参考和适用文件、材料和设备、健康和安全注意事项、文件要求和程序包括的附件/附录:Thermomax每周校准数据表关于本文件:这不是通用模板，这是一个5页的程序，实际上是在FDA的质量控制操作中创建和使用的- 受监管的机构。公司特定信息（名称、地址、一些图片、专有产品信息等）已被编辑，但内容和格式已基本保留。购买理由:将其作为你自己文档项目的起点，将你文档的质量与你所在行业的同行进行比较，了解你所在行业的其他公司在做什么，谁会从中受益:质量保证经理制造经理质量控制人员

Summary:Describes a procedure for performing routine maintenance and calibration check on the ThermoMax microplate reader from Molecular Devices. Applies to the ThermoMax microplate reader located in a QC Lab. Includes instructions for weekly verifications of the filter, alignment, linearity and accuracy, as well as replacement of the lamp and fuse.Included Sections:Purpose, Scope, Responsibility, References and Applicable Documents, Materials and Equipment, Health and Safety Considerations, Documentation Requirements, and ProceduresIncluded Attachments/Appendices:Thermomax Weekly Calibration Data SheetAbout This Document:This is not a generic template, it's a 5-page procedure that was actually created and used in the Quality Control operations of a FDA-regulated establishment. The company-specific information (names, addresses, some images, proprietary product information, etc.) has been redacted but the content and format have been largely preserved.Reasons to Buy:Use it as a starting point for your own documentation projectCompare the quality of your documents against your industry peersLearn what other companies in your industry are actually doingWho Will Benefit:Quality Assurance ManagersManufacturing ManagersQuality Control Personnel