BS EN 196-1:2016描述了测定抗压强度和（可选）抗压强度的方法 水泥砂浆的抗折强度。该方法适用于普通水泥和其他水泥和水泥 材料，这些标准要求使用这种方法。它可能不适用于其他类型的水泥， 例如，非常短的初凝时间。该方法用于评估水泥的抗压强度是否符合其规范，以及CEN标准砂EN 196-1或替代压实的验证试验 设备EN 196的这一部分描述了参考设备和程序，并允许替代 使用的压实设备和程序，前提是已在 根据本文件中的适当规定。如果发生争议，只有 使用参考设备和程序。交叉引用:EN 196-7EN 197-1EN ISO 1101ISO 1101EN ISO 1302ISO 1302EN ISO 7500- 1ISO 7500-1ISO 565ISO 3310-1ISO 4200购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN 196-1:2016 describes the method for the determination of the compressive and, optionally, the flexural strength of cement mortar. The method applies to common cements and to other cements and materials, the standards for which call up this method. It may not apply to other cement types that have, for example, a very short initial setting time.The method is used for assessing whether the compressive strength of cement is in conformity with its specification and for validation testing of a CEN Standard sand, EN 196-1, or alternative compaction equipment.This part of EN 196 describes the reference equipment and procedure and allows alternative compaction equipment and procedures to be used provided that they have been validated in accordance with the appropriate provisions in this document. In the event of a dispute, only the reference equipment and procedure are used.Cross References:EN 196-7EN 197-1EN ISO 1101ISO 1101EN ISO 1302ISO 1302EN ISO 7500-1ISO 7500-1ISO 565ISO 3310-1ISO 4200All current amendments available at time of purchase are included with the purchase of this document.