现行

KS M 3359(2021 Confirm)

에폭시 성형 화합물
环氧模塑化合物规范

2016-12-15

现行

ASTM D3013-13(2021)

Standard Specification for Epoxy Molding Compounds
环氧模塑化合物的标准规范

2021-07-01

现行

SJ/T 11197-2013

环氧塑封料
Epoxy molding compound

2013-10-17

现行

KS D 2055

에폭시 봉지제의 납 및 카드뮴 정량 방법
用于测定的铅和镉的环氧树脂模制化合物的方法

2016-12-19

现行

KS D 2055(2021 Confirm)

에폭시 봉지제의 납 및 카드뮴 정량 방법
环氧模塑料中铅和镉的测定方法

2016-12-19

现行

GB/T 40564-2021

电子封装用环氧塑封料测试方法
Test method of epoxy molding compound for electronic packaging

2021-10-11

现行

SAE AMS3672C

Plastic Molding Compound, Epi-Bis Epoxy, Glass Fiber Reinforced, Structural
塑料模塑料 Epi双环氧树脂 玻璃纤维增强 结构

1995-10-01

现行

SAE AMS3671C

Plastic Molding Compound, Novolac Epoxy Resin, Short Glass Fiber Reinforced, Structural
塑料模塑料 酚醛环氧树脂 短玻璃纤维增强 结构

1996-10-01

现行

MIL MIL-C-47224B Notice 1-Inactivation

COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE-COMPONENT (SUPERSEDING MIL-C-47224A)
单组分环氧树脂模塑转移化合物（取代MIL-C-47224A）

1996-04-17

现行

MIL MIL-C-47224B

COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE-COMPONENT (SUPERSEDING MIL-C-47224A)
单组分环氧树脂模塑转移化合物（取代MIL-C-47224A）

1993-01-04

现行

ASTM D5948-05(2020)

Standard Specification for Molding Compounds, Thermosetting
热固性模塑化合物的标准规范

2020-12-01

现行

ASTM D1636-21

Standard Specification for Allyl Molding Compounds
烯丙基模塑化合物的标准规范

2021-07-01

现行

MIL MIL-C-47224A Amendment 1

COMPOUND, MOLDING, TRANSFER, EPOXY RESIN, SINGLE-COMPONENT (S/S BY MIL-C-47224B)
复合 模塑 转移 环氧树脂 单组分（S/S由MIL-C-47224B）

1987-12-14

现行

ASTM D705-99(2020)

Standard Specification for Urea-Formaldehyde Molding Compounds
尿素 - 甲醛成型化合物的标准规格

2020-12-01

现行

ASTM D704-99(2020)

Standard Specification for Melamine-Formaldehyde Molding Compounds
三聚氰胺 - 甲醛成型化合物的标准规格

2020-12-01

现行

ASTM D1201-13(2022)e1

Standard Specification for Thermosetting Polyester Molding Compounds
热固性聚酯模塑化合物的标准规范

2022-01-01

现行

MIL MIL-M-14/8 Amendment 2

MOLDING COMPOUNDS, EPOXY THERMOSETTING, CONTAINING MINERAL/GLASS FILLERS (S/S BY ASTM-D5948-1996E1)
含有矿物/玻璃填料的环氧热固性模塑化合物（根据ASTM-D5948-1996E1的标准）

1991-05-28

现行

MIL MIL-M-14/8

MOLDING COMPOUNDS, EPOXY THERMOSETTING, CONTAINING MINERAL/GLASS FILLERS (S/S BY ASTM-D5948-1996E1)
含矿物/玻璃填料的环氧热固性模塑料（S/S由ASTM-D5948-1996E1规定）

1990-04-02

现行

ASTM D787-18

Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
乙基纤维素成型和挤出化合物的标准规范

2018-04-01

现行

NASA KSC-SPEC-E-0029 Rev.A

NOTICE OF CANCELLATION, Compound, Potting and Molding, Elastomeric, Specification for
取消通知 化合物 灌封和成型 弹性体 规范

2019-10-30