SAE AS6119-管件组件弯头 90？轴向锻造液压高达1500 PSI-国家数字标准馆

现行 SAE AS6119

到馆提醒

收藏跟踪

购买正版

FITTING ASSEMBLY, ELBOW, 90° AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI 管件组件弯头 90？轴向锻造液压高达1500 PSI

发布日期： 2011-07-06

分类信息

发布单位或类别：美国-美国机动车工程师协会

关联关系

研制信息

相似标准/计划/法规

FITTING ASSEMBLY, ELBOW, 90°, AXIALLY SWAGED, FEMALE FLARELESS, HYDRAULIC, UP TO 1500 PSI
管件组件 90度弯头轴向锻造内螺纹无扩口液压高达1500 PSI

FITTING ASSEMBLY, ELBOW, 45° AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
管件组件弯头 45？轴向锻造液压高达1500 PSI

FITTING ASSEMBLY, ELBOW, 45°, AXIALLY SWAGED, FEMALE FLARELESS, HYDRAULIC, UP TO 1500 PSI
管件组件弯头 45度轴向锻造无内扩口液压高达1500 PSI

FITTING ASSEMBLY, TEE, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
接头组件三通轴向锻造液压高达1500 PSI

FITTING ASSEMBLY, UNION, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
接头总成接头轴向锻造液压高达1500 PSI

FITTING ASSEMBLY, ELBOW, 90°, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
管件组件弯头 90度轴向锻造液压 5080磅/平方英寸

FITTING ASSEMBLY, EXTENDED UNION, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
接头总成加长管接头轴向锻造液压压力高达1500 PSI

FITTING ASSEMBLY, STRAIGHT, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
直型、外扩口、轴向模锻、液压接头组件压力高达1500 PSI

FITTING ASSEMBLY, STRAIGHT, BULKHEAD, FLARELESS, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
直型、隔板、无扩口、轴向模锻、液压、高达1500 PSI的管件总成

FITTING ASSEMBLY, STRAIGHT, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, UP TO 1500 PSI
直型、内螺纹无扩口、轴向锻造、液压配件总成最大压力为1500 PSI

FITTING ASSEMBLY, ELBOW, 90°, BULKHEAD FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI
管件总成 90度弯头无隔板扩口轴向锻造液压 3000磅/平方英寸

FITTING ASSEMBLY, ELBOW, 90°, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 3000 PSI
管件总成 90度弯头外扩口轴向锻造液压 3000磅/平方英寸

FITTING ASSEMBLY, ELBOW, 90°, FEMALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
管件总成 90°弯头内螺纹无扩口轴向锻造液压 5080 PSI

FITTING ASSEMBLY, ELBOW, 45°, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
管件组件弯头 45度轴向锻造液压 5080磅/平方英寸

FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, FEMALE FLARELESS ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
管件组件三通运行时轴向锻造侧面无内扩口液压高达1500 PSI

FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, MALE FLARELESS ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
管件总成三通运行时轴向锻造侧面无外扩口液压高达1500 PSI

FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, BULKHEAD FLARELESS ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
管件总成三通在管路上轴向锻造侧壁无扩口液压高达1500 PSI

FLARING ASSEMBLY, TEE, AXIALLY SWAGED, FEMALE FLARELESS ON THE RUN, AXIALLY SWAGED ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
扩口组件三通轴向锻造运行时无内扩口侧面轴向锻造液压高达1500 PSI

FITTING ASSEMBLY, TEE, AXIALLY SWAGED ON THE RUN, INTERNAL PORT END ON THE SIDE, HYDRAULIC, UP TO 1500 PSI
接头组件三通在管路上轴向型锻内部端口端在侧面液压最高1500 PSI

FITTING ASSEMBLY, 90°, MALE FLARELESS, AXIALLY SWAGED, HYDRAULIC, 5080 PSI
管件总成 90度无扩口轴向锻造液压 5080磅/平方英寸

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统