ISO/TR 17243-1:2014提供了如何评估主轴壳体上测量的机床主轴振动严重性的信息。ISO/TR 17243本部分中提供的振动标准适用于带有整体驱动的主轴，用于额定运行速度在600 min？1和30 000 min？1之间的固定式机床。ISO/TR 17243的本部分仅适用于滚动轴承类型的主轴。 ISO/TR 17243-1:2014适用于在金属切削机床上组装的主轴。 ISO/TR 17243-1:2014适用于测试、定期验证和持续监测。 ISO/TR 17243本部分不包括轴承类型不同于滚动元件轴承的主轴。 ISO/TR 17243-1:2014未涉及旋转轴的几何精度（见ISO 230-7）。 ISO/TR 17243-1:2014未涉及表面光洁度和精度方面不可接受的切削性能。 ISO/TR 17243-1:2014没有解决以低于600 min？1或超过30000 min？1的速度运行的机床主轴的振动严重性问题，因为缺乏支持性振动数据以及许多振动测量仪器的局限性。此外，由于缺乏数据，ISO/TR 17243本部分不包括轴承类型非滚动元件轴承的机床主轴。 ISO/TR 17243-1:2014未涉及频域分析，如快速傅立叶变换（FFT）分析、包络分析或其他类似技术。

ISO/TR 17243-1: 2014 provides information on how to assess the severity of machine tool spindle vibrations measured on the spindle housing. The vibration criteria provided in this part of ISO/TR 17243 apply to spindles with integral drive intended for stationary machine tools with nominal operating speeds between 600 min？1 and 30 000 min？1. This part of ISO/TR 17243 only applies to spindles with rolling element bearing types. ISO/TR 17243-1: 2014 applies to spindles assembled on metal cutting machine tools. ISO/TR 17243-1: 2014 is applicable for testing, periodic verification, and continuous monitoring. Spindles with bearing types other than rolling element bearings are excluded from this part of ISO/TR 17243. ISO/TR 17243-1: 2014 does not address geometrical accuracy of axes of rotation (see ISO 230？7). ISO/TR 17243-1: 2014 does not address unacceptable cutting performance with regards to surface finish and accuracy. ISO/TR 17243-1: 2014 does not address vibration severity issues of machine tool spindles operating at speeds below 600 min？1 or exceeding 30 000 min？1 due to lack of supporting vibration data and limitations in many vibration measurement instruments. Also, due to lack of data, machine tool spindles with bearing types other than rolling element bearings are excluded from this part of ISO/TR 17243. ISO/TR 17243-1: 2014 does not address frequency domain analyses such as fast fourier transform (FFT) analyses, envelope analyses, or other similar techniques.