1.1 本试验方法适用于质量分数范围为22 mg/kg至1136 mg/kg的煤中总氯的测定。 1.2 以国际单位制表示的数值应视为标准。SI单位后括号中给出的值仅供参考，不被视为标准值。 1.3 本标准并不旨在解决与其使用相关的所有安全问题（如有）。本标准的使用者有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 ====意义和用途====== 4.1 该试验方法允许测量煤中氯的总质量分数。

1.1 This test method covers the determination of total chlorine in coal with a mass fraction range of 22 mg/kg to 1136 mg/kg. 1.2 The values stated in SI units are to be regarded as standard. The values given in parentheses after SI units are provided for information only and are not considered standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This test method permits measurements of the total chlorine mass fraction in coal.