1.1 本标准确定了第节中定义的固定直立和横卧运动自行车和测功仪的设计和制造参数 3. . 1.2 本标准旨在规定仅适用于13岁及以上个人的健身产品。 1.3 本标准将与规范一起使用 F2276页 和试验方法 F3023 . 1.4 本规范旨在减少与使用直立和横卧自行车及测功仪进行固定运动相关的已证明危险。 1.5 本规范旨在为固定式直立和横卧运动自行车和测功仪的用户在储存、移动、进入、使用和退出产品期间提供合理的安全标准。 1.6 本标准不适用于将公路自行车转换为室内固定自行车的机制。 1.7 本规范 2. 为商业健身设备的设计制定了参考ASTM标准中未规定的额外要求，以增加功能受限或受损人员的使用和用户独立性。 1.8 以国际单位制表示的数值应视为标准值。括号中的值仅供参考。 1.9 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.10 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This standard establishes parameters for the design and manufacture of stationary upright and recumbent exercise bicycles and ergometers as defined in Section 3 . 1.2 It is the intent of this standard to specify fitness products for use only by an individual age 13 and older. 1.3 This standard is to be used in conjunction with Specification F2276 and Test Methods F3023 . 1.4 This specification is intended to reduce the demonstrated hazards associated with the use of stationary exercise upright and recumbent bicycles and ergometers. 1.5 This specification is written to provide reasonable safety standards for the user of stationary upright and recumbent exercise bicycles and ergometers during storage, movement, entry, use and exit from the product. 1.6 This standard does not apply to mechanisms that convert road bicycles into indoor stationary bicycles. 1.7 This specification 2 establishes additional requirements not set forth in the referenced ASTM standards for the design of commercial fitness equipment to increase access and user independence by people with functional limitations or impairments. 1.8 The values stated in SI units are to be regarded as standard. The values in parentheses are for information only. 1.9 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.10 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.