BS EN 1515-4:2021-法兰及其接头抽薹-国家数字标准馆

现行 BS EN 1515-4:2021

到馆提醒

收藏跟踪

购买正版

Flanges and their joints. Bolting-Selection of bolting for equipment subject to the Pressure Equipment Directive 2014/68/EU 法兰及其接头抽薹

发布日期： 2022-08-31

本文件适用于符合以下要求的设备上法兰接头的螺栓连接选择:
压力设备指令2014/68/EU。
它规定了尺寸、材料性能和技术要求的标准和附加要求
螺栓连接的交付条件。购买本文件时可获得的所有当前修订均包含在购买本文件中。

This document is applicable to the selection of bolting for flanged joints on equipment subject to the
Pressure Equipment Directive 2014/68/EU.
It specifies standards and additional requirements for dimensions, material properties and technical
conditions of delivery for bolting.All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Flanges and their joints - Bolting - Part 1: Selection of bolting
法兰及其接头.螺栓连接.第1部分:螺栓连接的选择；德文版EN 1515-1:1999

UNE-EN 1515-1-2000

FLANGES AND THEIR JOINTS - BOLTING - PART 1: SELECTION OF BOLTING
法兰及其接头.螺栓连接.第1部分:螺栓连接的选择

UNE-EN 1515-4-2010

Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC
法兰及其接头.螺栓连接.第4部分:符合压力设备指令97/23/EC的设备螺栓连接的选择

ASTM F704-81(2022)

Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints
管道系统法兰接头螺栓长度的选择

UNE-CEN/TS 1591-4-2010 IN

Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第4部分:装配在符合压力设备指令的设备上的螺栓连接件的人员能力鉴定

BS 11/30234814 DC

BS EN 1591-4. Flanges and their joints. Design rules for gasketed circular flange connections. Part 4. Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive
英国标准EN 1591-4 法兰及其接头垫圈圆形法兰连接的设计规则第四部分根据压力设备指令对安装在设备上的螺栓接头组装人员进行资格鉴定

DIN CEN/TS 1591-4

Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive; German version CEN/TS 1591-4:2007
法兰及其连接件.带垫圈的圆形法兰连接件的设计规则.第4部分:装配在符合压力设备指令的设备上的螺栓连接件的人员能力鉴定；德文版CEN/TS 1591-4:2007

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统