现行

DIN EN 2587

Aerospace series; rod ends, adjustable double fork and threaded shank; dimensions and loads
航空航天系列；杆端 可调双叉和螺纹柄；尺寸和荷载

1991-07-01

现行

UNE-EN 2587-1992

AEROSPACE SERIES. ROD-ENDS, ADJUSTABLE DOUBLE FORK AND THREADED SHANK. DIMENSIONS AND LOADS.
航空航天系列 杆端 可调双叉和螺纹柄 尺寸和负载

1992-09-21

现行

DIN EN 2515

Aerospace series; rod ends, adjustable single fork and threaded shank; dimensions and loads
航空航天系列；杆端、可调单叉和螺纹杆；尺寸和荷载

1991-07-01

现行

UNE-EN 2792-1992

AEROSPACE SERIES. ROD ENDS, ADJUSTABLE, DOUBLE FORK AND THREADED SHANK WITH ENGAGEMENT: 1,5 X THREAD DIAMETER. DIMENSIONS AND LOADS.
航空航天系列 杆端 可调 双叉和螺纹杆 带啮合:1.5 X螺纹直径 尺寸和负载

1992-09-21

现行

BS EN 2587-1990

Specification for rod ends, adjustable double fork and threaded shank. Dimensions and loads
杆端、可调双叉和螺纹柄规范 尺寸和荷载

1990-12-31

现行

DIN 65365

Aerospace; double fork ends for adjustable control rods
航空航天可调控制杆的双叉端

1991-11-01

现行

BS EN 2792-1991

Rod ends, adjustable, double fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
杆端 可调 双叉和螺纹杆 带啮合:1.5螺纹直径 尺寸和荷载

1991-08-30

现行

UNE-EN 2791-1992

AEROSPACE SERIES. ROD ENDS, ADJUSTABLE, SINGLE FORK AND THREADED SHANK WITH ENGAGEMENT: 1,5 x DIAMETER THREAD. DIMENSIONS AND LOADS.
航空航天系列 杆端 可调 单叉和螺纹杆 带啮合:1.5 x直径螺纹 尺寸和负载

1992-09-21

现行

UNE-EN 2515-1992

AEROSPACE SERIES. ROOD-ENDS, ADJUSTABLE SINGLE FORK AND THREADED SHANK. DIMENSIONS AND LOADS.
航空航天系列 ROOD-end 可调单叉和螺纹柄 尺寸和负载

1992-09-21

现行

BS EN 2515-1990

Specification for rod ends, adjustable single fork and threaded shank. Dimensions and loads
杆端、可调单叉和螺纹柄规范 尺寸和荷载

1990-12-31

现行

BS EN 4424-2006

Aerospace series. Rod-ends, adjustable single fork and threaded shank with engagement: 1,5 x thread diameter in titanium alloys. Dimensions and loads
航空航天系列 杆端、可调单叉和螺纹柄 带啮合:钛合金螺纹直径的1.5倍 尺寸和荷载

2006-06-30

现行

BS EN 2791-1991

Rod ends, adjustable, single fork and threaded shank with engagement: 1.5 thread diameter. Dimensions and loads
杆端 可调 单叉和螺纹杆 带啮合:1.5螺纹直径 尺寸和荷载

1991-08-30

现行

DIN EN 2791

Aerospace series; rod-ends, adjustable, single fork and threaded shank with engagement: 1.5 × thread diameter; dimensions and loads; german version EN 2791:1991
航空航天系列；杆端 可调 单叉和螺纹杆 带啮合:1.5×螺纹直径；尺寸和载荷；德文版EN 2791:1991

1991-10-01

现行

BS EN 6029-2017

Aerospace series. Rod-ends, adjustable, single fork with UNJ threaded shank min. engagement: 1,5 x thread diameter in corrosion resisting steel. Dimensions and loads. Inch series
航空航天系列 杆端 可调 单叉 带UNJ螺纹柄 最小啮合:1.5 x耐腐蚀钢螺纹直径 尺寸和负载 英寸系列

2017-01-31

现行

UNE-EN 3541-1992

AEROSPACE SERIES. ROD ENDS, ADJUSTABLE, SELF-ALIGNING BALL BEARING WITH THREADED SHANK. DIMENSIONS, TORQUES, CLEARANCES AND LOADS
航空航天系列 杆端 可调 带螺纹杆的自对准滚珠轴承 尺寸、扭矩、间隙和负载

1992-11-23

现行

DIN EN 4424

Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1.5 × thread diameter in titanium alloys - Dimensions and loads; German and English version EN 4424:2006
航空航天系列.可调单叉杆端和带啮合的螺纹杆:钛合金1.5×螺纹直径.尺寸和载荷；德语和英语版本EN 4424:2006

2007-03-01

现行

DIN EN 2498

Aerospace series; rod ends, adjustable, self-aligning plain bearing with self-lubricating liner and threaded shank; dimensions and loads
航空航天系列；杆端 可调、自调心滑动轴承 带自润滑衬套和螺纹杆；尺寸和荷载

1991-08-01

现行

UNE-EN 2498-1992

AEROSPACE SERIES. ROD ENDS, ADJUSTABLE SELF-ALIGNING PLAIN BEARING WITH SELF-LUBRICATING LINER AND THREADED SHANK. DIMENSIONS AND LOADS.
航空航天系列 杆端 带自润滑衬套和螺纹杆的可调自调心滑动轴承 尺寸和负载

1992-09-21

现行

ASD-STAN prEN 6029

Rod-ends,adjustable,single fork - with UNJ threaded shank - min. engagement: 1,5xthread diameter - in corrosion resisting steel - Dimensions and loads - Inch series
可调单叉杆端-带UNJ螺纹杆-最小啮合:1.5X螺纹直径-耐腐蚀钢-尺寸和负载-英制系列

1998-08-31

现行

BS EN 4036-2021

Aerospace series. Rod end, adjustable, with self-aligning double row ball bearing and threaded shank, in corrosion resisting steel, reduced internal radial clearance. Dimensions and loads
航空航天系列 杆端 可调 带自对准双列滚珠轴承和螺纹杆 采用耐腐蚀钢 内部径向间隙减小 尺寸和荷载

2021-03-16