BS EN 62053-11:2003+A1:2017仅适用于精度等级为0,5 1和2的新制造机电式电度表，用于测量50 Hz或60 Hz网络中的交流电有功能量，且仅适用于其型式试验。它仅适用于室内和室外应用的机电式电度表，包括一个测量元件和一个仪表箱中封装的寄存器。它也适用于运行指示器和测试输出。如果电表有一个用于多种能源的测量元件（多电能表），或当其他功能元件，如最大需求指示器、电子电费寄存器、时间开关、纹波控制接收器、数据通信接口等时。 如果这些元件封装在仪表箱中，则这些元件的相关标准也适用。不适用于:接线端子间的电压超过600 V的电度表（多相系统电度表的线间电压）；便携式仪表；仪表寄存器的数据接口。IEC 62052-31:2015涵盖了安全方面。关于验收试验，见IEC 62057-11:2008和IEC 62057-21:2008。IEC 62059系列文件涵盖了可靠性方面。交叉引用:IEC 60514:1975IEC 60736:1982IEC 62052-11:2003EN 60514:1995EN 62052-11:2003包含以下内容:AMD 15025于2004年2月25日发布AMD 15025为勘误表。修正案，2017年3月。修订并替换BS EN 62053-11:2003

BS EN 62053-11:2003+A1:2017 applies only to newly manufactured electromechanical watt-hour meters of accuracy classes 0,5 1 and 2, for the measurement of alternating current electrical active energy in 50 Hz or 60 Hz networks and it applies to their type tests only.It applies only to electromechanical watt-hour meters for indoor and outdoor application consisting of a measuring element and register(s) enclosed together in a meter case. It also applies to operation indicator(s) and test output(s). If the meter has a measuring element for more than one type of energy (multi-energy meters), or when other functional elements, like maximum demand indicators, electronic tariff registers, time switches, ripple control receivers, data communication interfaces, etc. are enclosed in the meter case, then the relevant standards for these elements also apply.It does not apply to:watt-hour meters where the voltage across the connection terminals exceeds 600 V (line-to-line voltage for meters for polyphase systems);portable meters;data interfaces to the register of the meter.The safety aspect is covered by IEC 62052-31:2015.Regarding acceptance tests, see IEC 62057-11:2008 and IEC 62057-21:2008.The dependability aspect is covered by the documents of the IEC 62059 series.Cross References:IEC 60514:1975IEC 60736:1982IEC 62052-11:2003EN 60514:1995EN 62052-11:2003Incorporates the following:AMD 15025 published 25 February 2004AMD 15025 is a Corrigendum. Amendment, March 2017. Amends and replaces BS EN 62053-11:2003