BS 2HR 52:2010-耐热钢坯、棒材、锻件和零件规范（镍25.5、铬14.7、钛1.8、锰1.5、钼1.2、钒0.3）-国家数字标准馆

现行 BS 2HR 52:2010

到馆阅读

收藏跟踪

购买正版

Specification for heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3) 耐热钢坯、棒材、锻件和零件规范（镍25.5、铬14.7、钛1.8、锰1.5、钼1.2、钒0.3）

发布日期： 2010-01-31

交叉引用:BS HR 100EN 4500-1EN 4500-3购买本文件时，所有当前可用的修订均包含在购买本文件中。

Cross References:BS HR 100EN 4500-1EN 4500-3All current amendments available at time of purchase are included with the purchase of this document.

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 19.5, Ti 0.4)
镍铬钛耐热合金坯料、棒材、锻件和零件规范（镍基、Cr 19.5、Ti 0.4）

Specification for chromium-nickel-copper-molybdenum corrosion-resisting steel (precipitation hardening) billets, bars, forgings and parts (930-1080 MPa)
铬镍铜钼耐蚀钢（沉淀硬化）坯料、棒材、锻件和零件规范（930-1080 MPa）

BS 3S 144-1995+A2-2015

Specification for chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1130-1330 MPa)
铬镍铜钼耐蚀钢（沉淀硬化）坯料、棒材、锻件和零件规范（1130-1330 MPa）

BS 3S 145-1996+A2-2015

Specification for Chromium-nickel-copper-molybdenum corrosion resisting steel (precipitation hardening) billets, bars, forgings and parts (1270 MPa to 1470 MPa)
铬镍铜钼耐蚀钢（沉淀硬化）坯料、棒材、锻件和零件规范（1270 MPa至1470 MPa）

Specification for chromium-molybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (930-1080 MPa) (Cr 10.5, Mo 0.6, V 0.2, Nb 0.3)
铬钼钒铌耐热钢坯、棒材、锻件和零件（930-1080 MPa）规范（Cr 10.5、Mo 0.6、V 0.2、Nb 0.3）

BS 09/30201778 DC

BS 2HR 52. Specification for heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 14.7, Ti 1.8, Mn 1.5, Mo 1.2, V 0.3)
BS 2HR 52 耐热钢坯、棒材、锻件和零件规范（镍25.5、铬14.7、钛1.8、锰1.5、钼1.2、钒0.3）

BS 3HR 1-2010+A1-2016

Specification for nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)
镍铬钛铝耐热合金坯料、棒材、锻件和零件规范（镍基、Cr 19.5、Ti 2.2、Al 1.4）

BS 09/30199933 DC

BS 2HR 5. Specification for nickel-chromium-titanium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 19.5, Ti 0.4)
BS 2HR 5 镍铬钛耐热合金坯料、棒材、锻件和零件规范（镍基、Cr 19.5、Ti 0.4）

Specification for 18/9 chromium-nickel corrosion-resisting steel (titanium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)
18/9铬镍耐蚀钢（钛稳定）坯料、棒材、锻件和零件规范（540 MPa:限制截面150 mm）

Specification for 18/9 chromium-nickel corrosion-resisting steel (niobium stabilized) billets, bars, forgings and parts (540 MPa: limiting ruling section 150 mm)
18/9铬镍耐蚀钢（铌稳定）坯料、棒材、锻件和零件规范（540 MPa:限制截面150 mm）

Specification for cobalt-chromium-tungsten-nickel-manganese heat-resisting alloy billets, bars and forgings (cobalt base Cr 20, W 15, Ni 10, Mn 1.5)
钴铬钨镍锰耐热合金坯料、棒材和锻件（钴基Cr 20、W 15、Ni 10、Mn 1.5）规范

BS 09/30199922 DC

BS 3HR 1. Specification for nickel-chromium-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (Nickel base, Cr 19.5, Ti 2.2, Al 1.4)
BS 3HR 1 镍铬钛铝耐热合金坯料、棒材、锻件和零件规范（镍基、Cr 19.5、Ti 2.2、Al 1.4）

Specification for high expansion heat-resisting steel billets, bars, forgings and parts (Ni 25.5, Cr 15, Ti 2, Mn 1.5, Mo 1.25, Si 0.7, V 0.3) (Solution treated at 980 °C)
高膨胀耐热钢坯、棒材、锻件和零件规范（镍25.5、铬15、钛2、锰1.5、钼1.25、硅0.7、钒0.3）（980℃固溶处理）

Specification for chromium-nickel-molybdenum-vanadium heat-resisting steel billets, bars, forgings and parts (930-1130 MPa: limiting ruling section 150 mm) (Cr 12, Ni 2.5, Mo 1.7, V 0.3)
铬-镍-钼-钒耐热钢坯、棒材、锻件和零件规范（930-1130 MPa:极限截面150 mm）（Cr 12、Ni 2.5、Mo 1.7、V 0.3）

BS 93/711199 DC

Aerospace series. Test methods for steel products. Part 8. Acceptance criteria for ultrasonic inspections of billets, bars, plates and forgings in steel, titanium, titanium alloys, aluminium alloys and heat resisting alloys (prEN 2003-8)
航空航天系列钢制品的试验方法第八部分钢、钛、钛合金、铝合金和耐热合金中坯料、棒材、板材和锻件的超声波检验验收标准（prEN 2003-8）

Specification for nickel-iron-chromium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (Ni/Co 42.5, Cr 12.5, Mo 5.8, Ti 3.0, Fe remainder)
镍铁铬钼钛耐热合金坯料、棒材、锻件和零件规范（镍/钴42.5、铬12.5、钼5.8、钛3.0、铁残渣）

Specification for chromium-cobalt-molybdenum-vanadium-niobium heat-resisting steel billets, bars, forgings and parts (consumable electrode remelted) (1000-1140 MPa) (Cr 10.5, Co 6, Mo 0.8, V 0.2, Nb 0.3)
铬钴钼钒铌耐热钢坯料、棒材、锻件和零件规范（自耗电极重熔）（1000-1140 MPa）（Cr 10.5 Co 6 Mo 0.8 V 0.2 Nb 0.3）

Specification for nickel-cobalt-chromium-molybdenum-aluminium-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 14.8, Mo 5, Al 4.8, Ti 1.2)
镍钴铬钼铝钛耐热合金坯料、棒材、锻件和零件（镍基、钴20、铬14.8、钼5、铝4.8、钛1.2）规范

Specification for nickel-cobalt-chromium-molybdenum-titanium-aluminium heat-resisting alloy billets, bars, forgings and parts (nickel base, Co 20, Cr 20, Mo 5.9, Ti 2.1, Al 0.5)
镍钴铬钼钛铝耐热合金坯料、棒材、锻件和零件（镍基、钴20、铬20、钼5.9、钛2.1、铝0.5）规范

Specification for nickel-chromium-cobalt-aluminium-molybdenum-titanium heat-resisting alloy billets, bars, forgings and parts (nickel base, Cr 15, Co 14.2, Al 5, Mo 4, Ti 4)
镍铬钴铝钼钛耐热合金坯料、棒材、锻件和零件（镍基、Cr15、Co14.2、Al5、Mo4、Ti4）规范

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统