ISO 13563的这一部分规定了在以下情况下验证单侧装载叉车稳定性的附加测试: 处理长度为6米及以上的空或满载货物集装箱。 ISO 13563的这一部分规定了除ISO 13563-11中规定的测试之外的测试。 ISO 13563本部分中包含的稳定性测试确保单侧装载叉车搬运货物 当在风速v高达 12.2米/秒（博福特等级6）。在具有较高v值的较高风速下，可以使用替代额定值。 3.4.3中的方程。 ISO 13563的这一部分不适用于卡车 a)它们正在处理可自由摆动的悬挂负载，或 b)他们正在处理具有移动重心的容器（参见ISO 3874）。ISO 13563这一部分的试验考虑了集装箱偏心装载的正常程度 在ISO 3874中定义。 当按照ISO 1496-2的规定，使用整体制冷装置（冷藏箱）处理空冷藏集装箱时， 应考虑负载的偏移。

This part of ISO 13563 specifies additional tests to verify the stability of single side loading fork-lift trucks when handling empty or laden freight containers of 6 m length and above. This part of ISO 13563 specifies tests in addition to those specified in ISO 13563-11). The stability tests contained in this part of ISO 13563 ensure that single side loading fork-lift trucks handling freight containers have satisfactory stability when operating the truck stacking in conditions where wind speed, v, is up to 12,2 m/s (Beaufort Scale 6). Alternative ratings may be used in higher wind speeds with higher values for v in the equation in 3.4.3. This part of ISO 13563 is not applicable to trucks when a) they are handling suspended loads that may swing freely, or b) they are handling a container with a mobile centre of gravity (see ISO 3874). The tests in this part of ISO 13563 take into account the normal degree of eccentric loading of containers as defined in ISO 3874. When handling empty refrigerated containers, as specified in ISO 1496-2, with integral refrigeration unit (reefers), account should be taken of the offset of the load.