1.1 本试验方法涵盖了从10 4. Pa·s至10 8. 通过测量小型实心圆柱体的粘性压缩率来测量Pa·s。 2. 1.2 以国际单位制表示的数值应视为标准。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 本试验方法非常适合在旋转粘度计的测量范围内测量玻璃的粘度（见实施规程 C965 )是有用的，并且梁弯曲粘度计的范围是有用的（参见测试方法 C1350M ). 可用于确定软化点附近区域的粘度/温度曲线（见试验方法 C338 ). 该测试方法有助于提供与玻璃形成商业物体时的行为相关的信息，并有助于研究和开发。

1.1 This test method covers the determination of the viscosity of glass from 10 4 Pa·s to 10 8 Pa·s by measuring the rate of viscous compression of a small, solid cylinder. 2 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This test method is well suited for measuring the viscosity of glasses between the range within which rotational viscometry (see Practice C965 ) is useful and the range within which beam bending viscometry is useful (see Test Method C1350M ). It can be used to determine the viscosity/temperature curve in the region near the softening point (see Test Method C338 ). This test method is useful for providing information related to the behavior of glass as it is formed into an object of commerce, and in research and development.