ISO 16872:2014规定了VH级精细公差起重链的要求，用于手动链式起重机的起重链。它们是圆钢短链，经过电焊、热处理和测试；它们符合ISO 1834的一般验收条件。 注1:字母“V”表示符合ISO 1834的等级。 注2:字母“H”表示这些起重链条仅适用于手动起重机。 注3:ISO 4063中列出了电阻对焊和闪光焊。 本国际标准涵盖的标称尺寸范围为3 mm至13 mm。根据本国际标准，精细公差起重链适用于？10°C至150°C的温度范围。

ISO 16872:2014 specifies the requirements for fine-tolerance hoist chains of grade VH for use as load chains in hand operated chain hoists for lifting purposes. They are round steel short link chains, electrically welded, heat treated, and tested; they comply with the general conditions of acceptance of ISO 1834. NOTE 1 The letter "V" expresses the grade in accordance with ISO 1834. NOTE 2 The letter "H" expresses that these hoist chains are for hand operated hoists only. NOTE 3 Resistance butt welding and flash welding are listed in ISO 4063. The range of nominal sizes covered by this International Standard is from 3 mm to 13 mm. Fine-tolerance hoist chains, according to this International Standard, are for use in the temperature range？10 °C to 150 °C.