1.1 本规范建立了一个国际符号，适用于所有含有令人陶醉的大麻素的产品，其含量或浓度足以产生主管当局（AHJ）认为必要的警告。 1.2 本规范适用于所有拟供消费者使用的成品，包括局部使用、摄入、吸入和任何/所有其他人体或动物体内或体内吸附方法。 1.3 本规范统一确定了与接触可能引起中毒（即改变心智或意识，或两者兼有）影响的物质相关的潜在健康和安全危险。 1.4 本规范旨在确保视觉清晰度和一致性，从而提高最终用户的识别和理解能力。 1.5 单位- 以国际单位制或英寸-磅单位表示的数值应单独视为标准值。每个系统中规定的值不一定是精确的等价物； 因此，为确保符合本标准，每个系统应独立使用，且两个系统的值不得组合。 1.6 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification establishes an international symbol applicable to all products containing intoxicating cannabinoids at a quantity or concentration sufficient to have a warning deemed necessary by the authority having jurisdiction (AHJ). 1.2 This specification shall apply to all finished products that are intended for consumer use, which includes topical use, ingestion, inhalation, and any/all other methods of adsorption on or in the body of a human or animal. 1.3 This specification provides uniformity in identifying potential health and safety hazards associated with exposure to a substance that may cause intoxicating (that is, mind or consciousness altering, or both) effects. 1.4 This specification seeks to ensure visual clarity and consistency, which results in improvement of recognition and comprehension for the end user. 1.5 Units— The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system are not necessarily exact equivalents; therefore, to ensure conformance with the standard, each system shall be used independently of the other, and values from the two systems shall not be combined. 1.6 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.