Polyethylene (PE) pipes and fittings. Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
聚乙烯（PE）管道和配件 对接熔焊接头试样抗拉强度和破坏模式的测定

2020-04-28

聚乙烯（PE）管材和管件 热熔对接接头 拉伸强度和破坏形式的测定
Polyethylene(PE)pipe and fittings-Determination of the tensile strength and failure mode of test pieces from a butt-fused joint

2005-03-23

Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint
聚乙烯（PE）管道和配件——对接熔焊接头试样抗拉强度和破坏模式的测定

2001-10-25

Polyethylene (PE) pipes and fittings — Determination of the tensile strength and failure mode of test pieces from a butt-fused joint — Amendment 1
聚乙烯（PE）管和配件.对接熔合接头试样拉伸强度和破坏模式的测定.修改件1

2020-04-20

Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
在拉入安装过程中测定聚乙烯（PE）气管容许拉伸载荷的标准实施规程

2021-07-01

가교화 폴리에틸렌(PE-X) 관 및 이음관－ 겔 함량에 따른 가교도 평가
交联聚乙烯（PE-X）制管道和管件——通过测定凝胶含量来估计交联度

2016-12-27

가교화 폴리에틸렌(PE-X) 관 및 이음관－ 겔 함량에 따른 가교도 평가
交联聚乙烯（PE-X）制管道和管件——通过测定凝胶含量对交联度的估计

2016-12-27

Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content
交联聚乙烯（PE-X）制成的管道和配件 通过测定凝胶含量来估计交联度

2005-07-14

Pipes and fitting made of crosslinked polyethylene (PE-X) -- Estimation of the degree of crosslinking by determination of the gel content
交联聚乙烯（PE-X）管材和管件用凝胶含量测定法测定交联度

1998-01-01

Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content
交联聚乙烯（PE-X）制成的管道和配件 通过测定凝胶含量来估计交联度

2013-01-31

Трубы и фитинги из сшитого полиэтилена (РЕ-Х). Оценка степени сшивки по содержанию гель-фракции
由交联聚乙烯（PE-X）制成的管道和配件 - 通过测定凝胶含量估算交联度

交联聚乙烯（PE-X）管材与管件 交联度的试验方法
Pipes and fittings made of crosslinked polyethylene(PE-X)--Estimation of the degree of crosslinkingby determination of the gel content

2001-10-24

Pipes and fittings made of crosslinked polyethylene (PE-X) — Estimation of the degree of crosslinking by determination of the gel content
交联聚乙烯（PE-X）制成的管道和配件——通过测定凝胶含量来估计交联度

2011-08-30

BS ISO 13956. Plastics pipes and fittings. Determination of cohesive resistance. Tear test for polyethylene (PE) saddle assemblies
BS ISO 13956 塑料管道和配件 内聚阻力的测定 聚乙烯（PE）鞍座组件的撕裂试验

2009-06-26

BS ISO 10147. Pipes and fittings made of crosslinked polyethylene (PE-X). Estimation of the degree of crosslinking by determination of the gel content
BS ISO 10147 交联聚乙烯（PE-X）制成的管道和配件 通过测定凝胶含量来估计交联度

2010-08-20

Methods of test for plastics pipes and fittings, Method 25: Determination of slow-crack-growth of PE (polyethylene) resins - Notched, constant ligament-stress (NCLS) method
塑料管道和配件的试验方法 方法25:聚乙烯（PE）树脂缓慢裂纹扩展的测定.缺口恒定韧带应力（NCLS）法

2005-09-30

Pipes and fittings made of unfilled, non-reinforced and crosslinked polyethylene (PE-X) - Determination of the degree of crosslinking through rheological measurement of the storage modulus; Text in German and English
未填充、未增强和交联聚乙烯（PE-X）制成的管道和配件.通过储能模量的流变测量测定交联度；德语和英语文本

2019-10-01