本欧洲标准规定了在混凝土生产中用作II型添加剂的地面造粒高炉渣的化学和物理性质以及质量控制程序的要求，包括特别是符合EN的现浇或预制结构混凝土206-1。符合本欧洲标准的磨碎的高炉渣也可用于砂浆和砂浆。 含有除助磨剂以外的任何添加物质的磨碎造粒炉渣不在本欧洲标准的范围内。在制定混凝土，砂浆或水泥浆的规定中，规定了粉砂粒炉渣的实际应用规定，也就是关于组成，混合，放置，固化等的要求，也不属于本欧标准范围。应提及其他欧洲或国家标准，如EN 206-1

This European Standard specifies requirements for the chemical and physical properties as well as quality control procedures for ground granulated blastfurnace slag for use as a type II addition in the production of concrete, including in particular cast-in-situ or prefabricated structural concrete conforming to EN 206-1. Ground granulated blastfurnace slag conforming to this European Standard may also be used in mortars and grouts. Ground granulated blastfurnace slag containing any added materials other than grinding aids, is not within the scope of this European Standard. It is also not within the scope of this European Standard to specify provisions governing the practical application of ground granulated blastfurnace slag in the production of concrete, mortar or grout, i.e. requirements concerning composition, mixing, placing, curing etc. As regards such provisions, reference should be made to other European or national standards, such as EN 206-1.